Included Accessories:

• Four 10x Probes, Accessory Pouch, Operators Manual, Power Cord

Instrument Options

• Opt. 05: Video Waveform Measurement System for bi-level sync formats
• Opt. 06: Counter/Timer/Trigger
• Opt. 09: Counter/Timer/Trigger with Word Recognizer
• Opt. 10: IEEE-488 GPIB Interface

4 Channel Analog Oscilloscope

• Four Channels
• 400 MHz Bandwidth
• Auto Setup
• Automatic Measurements
• Save and Recall Front-panel Setups
• Cursor

Characteristics

• Vertical System
  * Deflection Factor: 2 mV/div to 5V/div, (CH 1 and CH2).  100mV/div and 500 mV/div (CH3 and CH4)
  * Frequency and Step Tr Response (-3 dB Bandwidth)/(Tr=0.35/BW) - BW/Rise Time: 400 MHz/0.875 ns (≥ 5 mV/div), and 350 MHz/1 ns (2 mV/div)
  * Bandwidth Limiter: Reduces upper -3dB to 20 MHz
  * Input Coupling and Max Voltage: (1 Mohm) AC, DC, GND; Max input voltage: 400 V (DC + peak AC). (50 ohm) Max input voltage: 5 V RMS
  * Input R and C: 1 Mohm and 15 pF or 50 ohm (nominal)
• Horizontal System
  * Display Modes: A (main sweep), A INTENsified, ALTernate, A INTEN with B (delayed sweep) and B.  In X-Y mode, CH 1 provides X-axis (horizontal) deflection
  * A Sweep Time Base Range: 500 ms/div to 5 ns/div (to 500 ps/div with X10 magnification)
  * B Sweep Time Base Range: 50 ms/div to 5 ns/div (to 500 ps/div with X10 magnification)
• Automatic Measurements: Period; Volts; Rise time, Fall time; Time A-B (from % to %); Time A-B (between two voltages); Pulse Width
• Triggering: A and B Trigger Coupling: DC, Noise Reject, HF Reject, LF Reject, AC
• X-Y Operation
  * X-Axis Deflection Factor Range, Variable Range, and Accuracy: Same as CH 1
  * X-Axis Bandwidth: DC to 3 MHz