TTC FB6000R Pictured
FB6000A and MC6000 May Be Available
Please Consult Your Sales Representative
Frequency Synthesizer
- Frequency Range: 50 Hz to 15 MHz
Receiver Timing
- Timing Modes: Synchronous; Asynchronous; Recovered
- Timing Sources: Data interface; Clock recovery (optional)
- Indicators: NO CLK indicator
- CLK INV indicator
- DATA INV indicator
Data Error Analysis
- Analysis Modes: Single; Continuous
- Indicators:
* Receiver Inputs: MK illuminates when a Mark is received; SP
illuminates when a Space is received
* DATA INV illuminates when received data is inverted from what is expected
* SYNC LOST LED
BER Test Intervals
- 104, 105, 106,
107, 108, 109,
or 1010 bits
- Time Test Intervals: one second to 24 hours, one-second resolution
Block Lengths: 102 to 106 bits, one-bit resolution
Signal Analysis:
Frequency Range: 50 Hz to 15 MHz, optionally to 52 MHz
|
|
|
TTC 6000R FIREBERD Communications Analyzer
Features:
- The Remote Control Feature gives you the ability
to control your FIREBERD 6000 via computer for automated testing. Ideal
for the manufacturing environment.
- Stress patterns and transmit level selections test the operating limit of
circuits and components. Find marginal equipment or service deficiencies before they
degrade network performance
- T1 and G.703 jitter generation and measurement tools analyze impairments per
CCITT Recommendations 0.171 and G.823 and AT&T PUBs 41451, 62411, and 43801
- Built-in frequency synthesizer transmits clock frequencies for testing at
standard and nonstandard rates from 50 Hz to 15 MHz
- Measurements such as clock recovery, inverted clock and data detection, and
round-trip delay offer sophisticated problem-solving capability
- Full programmability - store and recall up to ten of your most frequently used
test configurations
- Built-in RS-232 Interface with DTE and DCE emulation for added convenience
- Remote control and printer operation for centralized testing at any remote site,
with printouts of all key test results as well as your instrument's current configuration
Modes of Operation
- Emulation: Emulate DTE, Emulate DCE
- System Configuration: Full-Duplex, Self-Loop
- Timing Modes: Synchronous, Asynchronous, Recovered
Generator Timing
- Ranges: Synchronous: 50 b/s to 52 Mb/s; Asynchronous: 50 b/s to 20 kb/s;
Recovered Clock: 50 b/s to 520 kb/s
- Timing Sources: Internal frequency synthesizer; BNC connector; Interface module
(or built-in RS-232 Interface)
- Indicators: LED illuminates when no generator clock signal is present
Data Generator
- Fixed Patterns: Mark; 1:1; User-Programmable, 3- to 24-bit repeating pattern;
1:7; 3-in-24; DDS-1 to DDS-6 (DDS-specific patterns); T1-1 to T1-6, T1 mW, and DALY
(T1-specific patterns); Tone (1004 Hz and 1020 Hz)
- Pseudorandom Patterns: 63 (26-1); 511 (29-1),
2047 (211-1); 215-1 (32, 767); 220-1
(1,1048,575); 223-1 (8,388,607); QRSS
- Messages:
FOX message
Three user-programmable messages, each up to 2048 characters in length
- Asynchronous Character Format:
Code: 5, 6, 7, or 8 bits
Parity: Odd, even, or none
Stop Bits: 1, 1.5 or 2 bits
- Error Insertion: Single error or fixed 10-3 bit error
rate in generated data only
|
