 |
Vitrek V4 Electrical Safety Tester
The Vitrek V4 Electrical Safety Tester is a multimodal, programmable AC/DC hipot that includes insulation resistance and ground bond testing. Vitrek's V4 Safety Tester automates testing up to 42 Amperes and test voltages up to 5 KVAC and 6 KVDC. Programming the Vitrek V4 allows for testing in 5V increments. Insulation Resistance testing offers ten high voltage trip points and full scale measurements to 1 KV and 10,000M Ohms.
This electrical safety tester is a 4-in-1 device with great reliability. Advanced Test Equipment Rentals can get you a quote on the Vitrek V4 or one of our similar electrical safety testers featured below.
Features:
- 5kVAC 40mA, 6kVDC 10mA
- High Speed Discharge
- Ground Bond 3 to 42 Amps RMS
- 36 Position Memory
- Multi-mode IR 50 to 1000V
- Selectable Arc Detection
- SFI™ Safety Fault Interrupt
- RS232 Standard, available GPIB
- PLC Remote Interface
Specifications:
AC Hipot
| Voltage Range: |
100 to 5000VAC RMS |
| Voltage Setting Resolution: |
5V/step |
| Voltage Regulation: |
1% of reading ± 5V |
| Voltage Accuracy: |
1% of reading ± 10V |
| Voltage Monitoring: |
At Output Terminals |
| Output Current: |
30mA to 40mA 180S max, 10 to 30mA continuous. Below 500V 10mA max |
| Min/Max Current Limits: |
0.1 to 40mA |
| Current Accuracy: |
1.5% of reading ± 50mA |
DC Hipot
| Voltage Range: |
100 to 6000VDC |
| Voltage Setting |
Resolution: 5V/step |
| Voltage Regulation: |
1% of reading ± 5V |
| Voltage Accuracy: |
1% of reading ± 10V |
| Voltage Monitoring: |
At Output Terminals |
| Max Output Current: |
10mA continuous, below 500VDC 2mA continuous |
| Min/Max Current Limits: |
0.1 to 10mA |
| Current Accuracy: |
1.5% of reading ± 50mA |
Insulation Resistance
| DC Output Voltage: |
50, 100, 500 or 1000V |
| Resistance Range: |
1 to 9900MΩ |
Resistance Accuracy: (% of reading) |
| 50, 100 VDC |
1-50MΩ 5%
51-200MΩ 10%
201-2000MΩ 20% |
| 500, 1000 VDC |
1-500MΩ 5%
501-2000MΩ 10%
2001-9900MΩ 20% |
| Multi-Mode IR™: |
Select 1 of 3 modes - Test passes on good reading, test fails on bad reading, pass/fail determined at end of test time. |
Ground Bond/Continuity
| Test Current: |
3 to 42 Amps RMS |
| Terminal Configuration: |
4 wire Kelvin |
| Resistance Range: |
0 to 600mW |
| Resistance Resolution: |
100mW |
| Resistance Accuracy: |
1% reading ± 3mΩ |
| Compliance Voltage: |
8V at terminals |
| Current Resolution: |
0.01A |
| Voltage Resolution: |
0.01V |
General
| Test Database: |
10 test sequences with up to 16 steps per test sequence |
| Front Panel Lockout: |
Prevents database edit while in lockout mode |
| Arc Detect: |
10 level trip select |
| Remote Interfaces: |
Fully interactive RS232 - standard. PLC Interface with Outputs of Testing, Pass, Fail and Inputs of Start, Reset - standard. Talk/Listen GPIB interface - Option GP-V4. |
| Timer Accuracy: |
0.25% ± 50mS |
| Power Source: |
100, 120, 220, 230VAC (±10% 50/60Hz), 350W max |
| Operating Environment: |
Indoor use, altitude up to 6500 ft (2000m). Installation Category II. Pollution Degree 2. |
| Operating Temperature: |
0°C to 40°C, 80% RH |
| Storage Temperature: |
-10°C to 70°C, 70% RH |
| Dimension: |
17.6"L x 13"W x 5.9"H, (446mmL x 330mmW x 149mmH) |
| Weight: |
33lbs (15kg) net, 40 lbs (18 kg) ship |
| Accessories |
NIST Cal Cert, TL-20-60 & K-2 Test Leads, Power Cord, Serial Interface Cable & User's Manual |
| Accuracy: |
Stated specifications apply for 1 year at 23°C ± 5°C. |
| Calibration: |
ANSI/NCSL Z540 Certificate of Calibration with Data provided, traceable to NIST. |
| Compliance: |
CE Mark Certified to EN61010 and EMC Directives EN50081-1 & EN50082-2. |
| Warranty: |
* 3 Year Extended Warranty with registration and annual factory calibration. 1 year parts and labor standard. |
QuickTest™ Software
| Option QT-V4: |
Bundled Test Automation Software and PC Serial Interface Cable. Easy to load graphical test sequence development and operating environment. Provides time/date, operator, test parameters, test results and readings. Results may be viewed, printed out or exported to a database program. |
|
