Rentals - Sales - Service
Advanced Test Equipment Rentals
Toll Free: 1-800-404-ATEC (2832)
Follow ATEC on LinkedInFollow ATEC on YouTubeFollow ATEC on TwitterFollow ATEC on Facebook



Home > Equipment > Recording Systems
Home > Manufacturers > Yokogawa
Yokogawa DL716 ScopeCorder

Yokogawa DL716 ScopeCorder

The Yokogawa DL716 provides as many as 16 analog and 32 bits digital input channels and can use an ultra-long memory with a capacity of 64 M words (with /M3 option).

Yokogawa DL716 Features:

  • Maximum 850 V (DC + ACpeak) isolated input
  • A variety of plug in modules
  • Accessories for special applications
  • Maximum A/D resolution: 16 bits
  • Large-capacity hard disk drive (optional)
  • A wide range of interfaces
  • Triggers
  • Ethernet Connectivity and 9.2 GB internal hard disk drive (option available only for the DL716)

Yokogawa DL716 Specifications:

Input
Type Plug-in module (each unit has a built-in A/ D converter)
Number of slots 16
Different modules can be used in combination with each other
Horizontal
Maximum record length (DL708E using two channels) 400 k words (standard)
4 M words (/M1 option)
8 M words (with /M2 option)
16 M words (with /M3 option)
Maximum record length (DL716 using four channels) 1 M word (standard)
8 M words (with /M1 option)
32 M words (with /M2 option)
64 M words (with /M3 option)
Time-axis accuracy ±0.005%
Sweep time (100 k words/channel model) 500 ns/div to 50,000 s/div (1/2/5 steps)
Sweep time (Other models) 500 ns/div to 100,000 s/div (1/2/5 steps)
Acquisition Modes
Normal Maximum sampling rate: 10 MS/s
Envelope Holds peak values at maximum sampling rate, regardless of Time/div.
Box average Increases resolution of A/D converter to a maximum of four bits
History memory Holds the past 1000 screenshots
Sequential store Specity between 2 and 1000 storage operations
Roll Works at maximum sampling rate of 200 kS/s
Triggers
Modes AUTO, AUTO-LEVEL, NORMAL, TIME
Pretrigger 0% to 100% (in 1% steps)
Sources INT (1 to 16 channels and LOGIC1, LOGIC2) EXT, LINE
LINE trigger cannot be used with the DC model (701831)
Slopes Rise, Fall, Both
Types Edge trigger
event/pattern trigger
A --> B (n), A Delay B, Edge on A
Pulse Width Trigger
B > Time, B < Time, B Timeout
window trigger
OR trigger
When you select LOGIC1, LOGIC2 or EXT as trigger source, only edge trigger is available
Time trigger The measurement-start time and intervals can be specified
Screen Refresh Rate
Using 1 channel Maximum 30 Hz
Using 8 channels Maximum 15 Hz
Using 16 channels Maximum 10 Hz

Please contact us for more information on the Yokogawa DL716 ScopeCorder

Similar Test Equipment

Rent / Lease Astro-Med Dash 16U Signal Conditioner / Recorder
Astro-Med Dash 16U
Signal Conditioner / Recorder

Rent the Yokogawa DL750P ScopeCorder
Yokogawa DL750P
ScopeCorder

Rent Yokogawa DL850 ScopeCorder
Yokogawa DL850
ScopeCorder

Rent / Lease Astro-Med Dash 18 Field Recorder
Astro-Med Dash 18
Field Recorder

Rent the Western Graphtec WR9000 Thermal Strip Chart Recorder
Western Graphtec WR9000
Thermal Strip
Chart Recorder

Forms Terms & Conditions Privacy Notice Home Page Terms of Use
Copyright © 1996-2010  |  Advanced Test Equipment Rentals  |  All Rights Reserved