|
|
Yokogawa Clamp-on Power Meter CW240 Power Supply Quality
The Yokogawa CW240 supports four single-phase two-wire systems, two single-phase three-wire systems and SCOTT connections. The CW240 supports currents ranging from 200.0 mA to 3000 A and voltages up to 1000 V. Electric power (instantaneous values, electric energy, and demand), harmonics, voltage fluctuations (dip, swell, and instantaneous power failure) and waveform scan all be measured simultaneously.
Yokogawa CW240 Features:
- Electric power analysis and power supply quality control in a single unit
- Simultaneous measurement of loads in four systems(common to voltage)
- Wide measurement range
- Leakage current measurement in four channels
- Wiring and Setting check function
- A large amount of data can be saved
- Analog input-output function
Yokogawa CW240 Specifications:
| Voltage(V)Range |
150.0/300.0/600.0/1000V |
| Current(A)Range |
96030(2A) |
200.0/500.0mA/1.000/2.000A |
| 96033(50A) |
5.000/10.00/20.00/50.00A |
| 96030(200A) |
20.00/50.00/100.0/200.0A |
| 96031(500A) |
50.00/100.0/200.0/500.0A |
| 96032(1000A) |
200.0/500.0A/1.000kA |
| 96034 3000A range |
300.0/750.0A/1.500/3.000kA |
| 96034 2000A range |
200.0/500.0A/1.000/2.000kA |
| 96034 1000A range |
100.0/200.0/500.0A/1.000kA |
| 96035 3000A range |
300.0/750.0A/1.500/3.000kA |
| 96035 300A range |
30.00/75.00/150.0/300.0A |
Phase/Wiring
Measurement
|
1P2W/1P3W/1P3W3i(Nutral line current)
3P3W2i(2wattmetermethod)/3P3W3i3wattmetermethod)
3P4W/3P4W4i(Nutral line current)
SCOTT wiring(1P3W + 3P3W) |
Number on
measurement system
(Common Voltage) |
1P2W |
4 system load |
| 1P3W |
2 system load |
| 3P3W2i |
2 system load |
| Measurement Mode |
Frequency, Electric Energy,Demand,Harmonics
Voltage
Function, Waveform |
| Data Saving |
PC Card, Internal Memory(1MByte) |
| Save data |
Standard Interval:
1/2/5/10/15/30sec.1/2/5/10/15/30/60min.
Short time interval:
0.1/0.2/0.5second for each waveform
|
Multi-lingual
Support |
English/Spanish/Korean/Japanese |
|
