• Features rugged design with shock absorbing overmold
• Provides auto-diagnostics of cabling faults in graphical and text representations
• Detects / excludes sources of noise from NEXT measurements
• Monitors traffic on 10BASE-T networks to help you identify if the cable link is the source of the problem
• Includes Windows-based DSP-LINK software - the quick and easy way to upload cable test results to your PC

Specifications

• Cable Types: UPT, FTP, ScTP, STP, Coax
• Test Standards:
  TIA Cat 3, 4, and 5 Basic Link or Channel
  ISO1 1801 Class A, B, C, or D
  IEEE 10Base5, 10Base2, or 10Base-T
  IEEE Token Ring 4 Mbps or 16 Mbps
  IEEE 100Base-TX, 100Base-T4
  IEEE 802.12 ( 100VG-AnyLan ) 4-UTP or 2 STP
  ANSI TP-PMD
  Aus / NZ Class C, D Basic Link or Channel
• Speed of Autotest: Full Autotest of Category 5 UTP cable, including 6 pair combinations for NEXT in both directions*, in less than 17 seconds
• Supported Tests: Wire Map; Length, Propagation Delay, Delay Skew; Attenuation; Attenuation-to-Crosstalk Ratio ( ACR ); ACR @ Remote*; Characteristic Impedance; DC Loop Resistance; Return Loss ( RL )
• Test Connections: One shielded 8-pin modular connector, (RJ45), and one BNC connector
• Power:
  Main Instrument: Rechargeable NiCad battery with 10-12 hours typical battery life
  Standard Remote Unit: Replaceable 9V 425 alkaline cell

Test Fiber Optic Cables
When paired with the optional Fluke DSP-FTK Fiber Test Kit, the DSP-100 detects bad connections, bad splices, broken fibers, and loss of power from bends and fiber-type mismatches.

CableMeter Includes:

• DSP-100 CableMeter
• DSP-100 Standard Remote
• DSP-LNK Software
• PC Serial Interface Cable
• AC Adapter / Charger
• Carrying Case
• Coax Patch Cable (1)
• 2m UTP Cat 5 Shielded Patch Cables (2)
• 10" Calibration Cable (1)

*Remote End Testing requires second DSP-100 in Smart Remote Mode