 |
|
Hipotronics 750-2/D149 AC Dielectric Test Set
The Hipotronics 750-2 AC Dielectric Test Sets are ruggedly designed systems engineered especially to provide AC test power for a variety of capacitive, inductive or resistive loads. This insulation tester is conservatively designed to ensure highest quality and dependability. The most advanced techniques have been used, to more than comply with the growing reliability standards imposed by the industry.
Features
- Continuously adjustable output
- Continuously adjustable overload from 10% - 100% of rated current
- "Zero Start" interlock
- External interlock provisions
- Triple-range voltmeter, output connected
- Single-range current meter
- Backup overload breaker
- Meter recalibration potentiometers (if applicable)
- HV "ON" and "OFF" pushbuttons
- Indicator Pilot Lights : Main Power, Control Power, "HV ON", Intlk
- Open, and Overload
Specifications
| Input |
120 VAC, 60 Hz, 20 Amps |
| Output |
50 kV at 2 kVA |
| Distortion |
less than 5% |
| Duty |
2 kVA @ 1 hour, 1.2 kVA countinuous |
| Kilovoltmeter |
Digital, 2 % accuracy |
| Current Meter |
Digital, 2% accuracy |
| Control Size |
23" W x 72" H x 24" Deep |
| HV section and test cage included in control cabinet |
Hipotronics D149 Series AC Dielectric Breakdown Tester Test Fixtures
Test fixtures for the Hipotronics D-149
series allow users to easily place material samples in the test chamber
for complete and repeatable testing. These fixtures are fitted with a
variety of electrodes and constructed of durable and easy to clean clear
plastics. An oil bath is available for placing a test fixture in an oil
bath when necessary. All of the test fixtures fit inside of Hipotronics
D-149 test sets.
| Model |
Description |
| TF-2-50 |
Type 1 electrodes - per ASTM D149 - 2" diameter electrode with edges rounded to 0.25" radius - for use with the 750-2-D149 or lower voltage units |
| TF-1-50 |
Type 2 electrodes - per ASTM D149 - 1" diameter electrode with edges rounded to 0.125" radius - for use with the 750-2-D149 or lower voltage units |
| TF-.25-50 |
Type 3 electrodes - per ASTM D149 - 1⁄4" diameter electrode with edges rounded to 0.0313" radius - for use with the 750-2-D149 or lower voltage units |
| TF-2-75 |
Type 1 electrodes - per ASTM D149 - 2" diameter electrode with edges rounded to 0.25" radius, 75 kV rated - for use with the 775-5-D149 units and 7100-5-D149 units |
| TF-1-75 |
Type 2 electrodes - per ASTM D149 - 1" diameter electrode with edges rounded to 0.125" radius, 75 kV rated - for use with the 775-5-D149 units and 7100-5-D149 units |
| TF-.25-75 |
Type 3 electrodes - per ASTM D149 - 1⁄4" diameter electrode with edges rounded to 0.0313" radius, 75 kV rated - for use with the 775-5-D149 units and 7100-5-D149 units |
| OB-50 |
Oil Bath Assembly - for use with the 750-2-D149 or lower voltage units |
| OB-75 |
Oil Bath Assembly - for use with the 775-5-D149 units and 7100-5-D149 units |
| TL-75 |
Test Leads - for use with the 775-5-D149 or lower voltage units |
|
