The Riser Bond 1205CXA is a Metallic Time Domain Reflectometer to 19.4 km, Cable Fault Locator for coaxial cables. The 1205CXA is used to find small faults that plague high bandwidth systems or cause digital signal interruption.
| Power |
Internal, Rechargeable, 7.2V Nickel Metal Hydride battery pack |
| Charging Source |
External 12 VAC transformer 1.3 Amps (minimum charger) |
| Operating Time |
Greater than 6 hours, continuous, without backlight |
| Operating temperature |
+32°F (0°C) to +122°F (+50°C) |
| Typical temperature |
5°F (-20°C) to +140°F (+60°C) |
| Storage temperature |
-4°F (-20°C) to +140°F (+60°C) |
| Humidity |
95% maximum relative humidity, non-condensing |
| Display |
320 x 240 dot matrix liquid crystal display (LCD) with CFL backlighting |
| Horizontal Resolution: |
<2000 ft: <0.25 ft at 0.99 VOP, <0.07 ft at 0.30 VOP >2000 ft: 1 ft at any VOP |
| Vertical Resolution: |
14 bits with 170 dots displayed |
| Vertical Sensitivity: |
Greater than 65 dB |
| Output Pulse |
Selectable output pulse widths |
| Maximum Range |
63,700 ft (19,400 m) at 0.990 VOP, 51,500 ft (15,500 m) at 0.800 VOP. Range varies with VOP. Maximum testable cable length will vary with pulse width and cable type |
| Distance Accuracy |
±0.1 ft (0.03 m) plus ±0.01% of reading. Accuracy will vary with VOP and cable type |
| Input Protection |
400 Volts (AC + DC) from DC to 400 Hz and decreases to 10 Volts at 1 MHz |
| Auto dBRL |
2 digit auto dBRL calculation at cursor setting |
| Velocity of Propagation |
Keypad selection from 0.300 to 0.990 in 0.001 or 0.01 increments |
| Waveform Storage |
Each with full vertical resolution |
| Standard |
8 waveforms |
| Optional |
32 waveforms |
| Automatic/Manual Noise Filter |
Standard: |
Two averaging filters |
| Optional: |
Multi-function/level filter routines |
| Output Connector: |
Front panel female BNC, Serial I/O Port: RS-232 |
| Height |
10.5 inches (267 mm) |
| Width |
9.75 inches (247.6 mm) |
| Depth |
5 inches (127 mm) |
| Weight |
6 pounds (3.6 kg) |
