HP / Agilent 35677B S-Parameter Test Set

• Frequency Range: 100 kHz to 200 MHz
• Test Port Impedance: 75 ohm
• Directivity: >40 dB
• Frequency Response
  * Transmission (S₂₁, S₁₂): ±1 dB, ±5 degrees
  * Reflection (S₁₁, S₂₂): ±1 dB, ±5 degrees
• Port Match
  * Test Ports 1, 2: > 26 dB
  * Test Ports 1, 2 Open/Short Ratio: < ±0.75 dB magnitude and < ±5 degrees phase
  * Input Port: > 20 dB return loss
  * Output Ports A, B, and R: > 26 dB return loss
• Test Port Isolation: > 100 dB
• Insertion Loss
  * RF Input to Test port 1 or 2: typically 13 dB
  * RF Input to Output Ports A, B, or R: typically 19 DB
  * RF Input Maximum Operating Level: +25 dBm or ±30 Vdc
• Connectors
  * Input Port and Output Ports A, B, and R: 50 ohm type N female
  * Test Ports 1 and 2: 50 ohm type N female
  * DC Bias Inputs: BNC female, rear panel
  * DC Bias Range: Typically ±30 Vdc and ±20mA with some degradation of RF specifications; 200 mA damage level
• Accessories Supplied
  * 4 ea. 50 ohm cables with Type N male connectors for connection to HP / Agilent 3577A
  * 1 ea. Test Set interconnect cable to HP / Agilent 3577A

The HP / Agilent 35677A is the 50 ohm version.