 |
|
HP / Agilent 66319D Mobile Communications dc Source
The HP / Agilent 66319D Mobile Communications dc
Source offers a built-in advanced measurement system to accurately measure
battery current drains when the device operates in different modes (such as
talk mode, active mode, standby mode, and off/sleep mode). Measurements made
during these modes are critical for ensuring that your devices are operating
properly and that you are getting the most out of the battery.
With the battery emulation features, the HP /
Agilent 66319D Mobile Communications dc
Source allows you to test your devices under the same power
conditions that exist in actual use. Emulating the battery is key when
characterizing battery operating life and detecting early product failures.
The dc source simulates the effects of internal resistance of the battery,
enabling it to emulate the operation of various battery types or batteries
in different charge states. Plus, the HP 66319D can simulate negative
resistance so that you can compensate for voltage drop due to wiring in a
fixture.
Agilent has designed in the capability and
flexibility that is required for accurately testing today's communications
devices as well as your next generation designs for cell phones (formats
include: 3G, cdma2000, WCDMA, CDMA, TDMA, GSM, PCS, DECT, TETRA, PHS, NADC),
PDAs, BluetoothTM enabled devices, and Wireless LAN access devices.
The HP / Agilent 66319D high performance model are recommended for new
automated test system platforms and for R&D applications.
HP / Agilent 66319D Features:
- Fast output response technology
- Programmable output response compensation
- Advanced DSP-based dynamic measurements
- Current sinking for testing and
calibrating charger circuitry
- Extensive protection features (including
broken sense lead detection)
- GPIB Interface, SCPI (Standard Commands
for Programmable Instruments), VXIplug&play drivers
- Output resistance programming (positive
and negative)
- Superior output stability with up to 6
meters of load leads
- Excellent transient voltage drop
(typically < 30 mV)
- Three current measurement ranges
- Additional advanced battery drain
measurements (CCDF, long term battery drain)
HP / Agilent 66319D Specifiations:
- Input range: -25 to +25 Vdc
- dc readback accuracy: 0.04% + 5 5 mV
- ac + dc readback accuracy (at 25°C
±5°C) with dc plus a sinewave input > 25 mV rms: 1% + 5 mV (60 Hz
to 10 kHz)
Auxilary output
Output ratings
Voltage: 0 to 12V
Current: 0 to 1.5A
Programming accuracy
Voltage 0.2% + 40 mV
+Current 0.2% + 4.5 mA
dc measurement accuracy
Voltage: 0.2% + 15 mV
+Current: 0.2% + 3 mA |
Ripple and Noise (20 Hz to 20 MHz)
Voltage
rms: 1 mV
peak-to-peak: 6 mV
Current
rms: 2 mA |
|
