HP / Agilent 83712B Synthesized CW Generator, 10 MHz to 20 GHz
The HP / Agilent 83712B synthesized CW generator sets a standard for
performance. No longer will you have to give up frequency coverage,
modulation or reliability to meet your budget. This signal source will
perform beyond your expectations at a price within your reach. Fundamental
oscillators and switched low-pass filters deliver <-55 dBc harmonics,
eliminate subharmonics and suppress spurious to <-60 dBc. This signal
source provides plenty of output power (typically >+14 dBm), while
spectral purity is maintained even at high power levels (typical output
power at frequencies below 1 GHz is +20 dBm).
HP / Agilent 83712B Features:
- High stability time base for frequency accuracy
- Low SSB phase noise for out-of-channel tests
- High power output for driving the LO port of mixers
- Low output power with option 1E1 for receiver
sensitivity and SINAD measurements
Specifications:
| Frequency |
| Range: |
10
MHz to 20 GHz |
| Resolution: |
1
kHz (1 Hz with Option 1E8) |
Stability
(with high-stability timebase, Option 1E5) |
Aging
rate: <1.5 x 109/day after 24-hour warm up
Temperature effects: <1 x 107 over 0 to 55° C, nominally <1.4
x 109/° C
Line voltage effects: <5 x 1010 for 10% change in line voltage |
Stability
(without high-stability timebase) |
Aging rate: <1.0 x 108/day after 72
hours at 25° C ± 10° C
Temperature effects: <5 x 106 over 0 to 55° C referenced to 25°
C |
| Frequency
switching time |
<50 ms to within 1 kHz for any
frequency step
<35 ms to within 1 kHz for <1 GHz steps not across the
10 GHz band switch point |
| RF
Output |
| Maximum leveled output power: |
| Frequency |
Standard |
with Option 1E1 |
| 0.01
to 1 GHz |
+13
dBm |
+13
dBm |
| 1
to 18 GHz |
+11
dBm |
+10
dBm |
| 18
to 20 GHz |
+10
dBm |
+
8 dBm |
| Minimum
leveled output power: |
4 dBm
with Option 1E1, 110 dBm |
| Display
resolution: |
0.01
dB |
Accuracy
(4 dBm1 to maximum specified leveled output power2): |
10 MHz to 50 MHz, ±1.3 dB
50 MHz to 20 GHz, ±1.0 dB |
| Accuracy
(over all power levels2): |
10 MHz to 50 MHz, ±2.3 dB (power ≥
90 dBm)
50 MHz to 20 GHz, ±2.0 dB (power ≥ 90 dBm)
10 MHz to 20 GHz, ±2.5 dB (power < 90 dBm) |
|
