HP / Agilent 84110EM EMC Pre-Production Evaluation System
9 kHz - 1.8 GHz
Also see HP / Agilent 84115EM
Consisting of the following components:
HP / Agilent 8591EM EMC Spectrum Analyzer, 9kHz-1.8GHz
HP / Agilent 11947A Transient Limiter
Protects spectrum analyzer input from damage caused by high level transients
from LISNs ( Line Impedance Stabilization Networks ) during EMI testing.
Features:
- Frequency Range: 9 kHz to 200 MHz
- Insertion Loss: 10 dB
- Maximum Input Level: 2.5 W (+34dBm) continuous; 10kW for 10µS Peak; ±12 VDC
HP / Agilent 11945A-E51 Close Field Probe Kit with
Preamp
- Designed to measure magnetic-field radiation from surface currents, slots,
cables, and ICs for EMC diagnostic and troubleshooting measurements.
- Operates from 9 kHz to 1 GHz
- Comes with a 2-meter RG-223 coaxial cable and SMA (f)-to -type-N (m) adapter, and
an SMA (f)-to-BNC (m) adapter for each probe.
- Option E51 adds the HP / Agilent 8447F Option H64 dual preamplifier (or HP /
Agilent 11909A preamplifier), a 36-inch (914-mm) type-N cable, and a carrying bag
for storage and protection of the entire set.
HP / Agilent 11955A ( EMCO 93110 ) Biconical Antenna
Features:
- Frequency Range: 30 MHz to 300 MHz
- Max Continuous Power: 0.5 W
- VSWR (avg): 1.8 : 1
- Impedance: 50 ohm
- Connector: type N female
- Mounting Base: 1/4 inch x 20 female thread
HP / Agilent 11956A ( EMCO 93146 ) Log Periodic Antenna
Features:
- Frequency Range: 200 MHz to 1 GHz
- Max Continuous Power: 1 kW
- Impedance: 50 ohm
- Connector: type N female
- Mounting Base: 1/4 inch x 20 female thread
HP / Agilent 11968C ( EMCO TR-3 ) Tripod
Features:
- Non-metallic to minimize unwanted reflections from test environment
HP / Agilent 11967D ( EMCO 3810/2 ) LISN / PLISN
Multi-line low pass filter networks used for conducted emissions
measurement. They are placed between the power mains and the EUT ( Equipment Under
Test ) to stabilize line impedance, provide a 50 ohm RF connection, and eliminate unwanted
RF signals from the line supply. Designed to be used with a signal analyzer for
making FCC 15, VDE 0871 & 0875, and EN55022 conformance measurements.
An Artificial Hand circuit which conforms to EN55014 is included. The
circuit is useful for testing hand-held equipment which does not have a connection to
protective earth ground.
Features:
- Frequency Range: 9 kHz to 30 MHz
- Continuous Current Rating: 10A
- Earth Line Choke
- Artificial Hand Network
Addition Accessories
- Antenna Cables
- EMI Suppresion Kit: assortment
|
