| |
 |
Agilent 87421A DC Power Supply
This power supply, is completely transistorized and suitable for either bench or relay rack operation. It is a compact, well
regulated, Constant Voltage/ Constant Current supply that will furnish full rated output voltage at the maximum rated
output current or can be continuously adjusted throughout the output range. The front panel Current controls can be used to establish the output
current limit (overload or short circuit) when the supply is used as a constant voltage source and the Voltage limit (ceiling) when the supply is used as
a constant current source. The Power supply has both front and rear terminals. Either the positive or negative output terminal may be grounded or the
power supply can be operated floating at up to a maximum of 300 volts off ground.
Features:
- Regulation is 0.01%.
- Rated 0 to 40 V @ 0.75 A.
- 1/2 Rack Width Unit.
- Constant Current/Constant Voltage Features.
- Fully Metered.
Specifications:
| Input |
105-125/210 VAC, single phase, 50-400Hz |
| Output |
0-40 volts @ 0.75 amps |
| Temperature Ranges |
Operating 0 to 50°C
Storage -40 to +85°C
|
|
