Rentals - Sales - Service
Advanced Test Equipment Rentals
Toll Free: 1-800-404-ATEC (2832)
Follow ATEC on LinkedInFollow ATEC on YouTubeFollow ATEC on TwitterFollow ATEC on Facebook



Home > Equipment > Loads > Microwave
Home > Manufacturers > HP / Agilent
  Agilent 60504A Power Supply

Agilent 911E Sliding Load

The coaxial sliding load and mismatch are movable, low reflection loads used to make precision microwave measurements. By moving the load, its reflection can be separated from the other reflections in the system. This technique allows you to measure the directivity of coaxial directional couplers and the residual standing wave ratio (SWR) of coaxial slotted lines. The sliding mismatch is mechanically similar to the sliding load except that its reflection is somewhat higher so that a known mismatch can be introduced into a system for calibration. The reflection is between 23 dB and 28 dB over the frequency range from 3 to 26.5 GHz.

The sliding load contains a hollow cylindrical iron-bearing plastic load element that surrounds the center conductor. The gradual tapering of the load element enables it to absorb the applied RF energy.

The load element can be moved within the instrument body at least one-half of a wavelength at the lowest rated frequency (3 GHz). Some applications may require that the load element be moved in precise steps. There are 6 marks scribed along the body of the load. Use these marks for optimum calibration of the vector network analyzer.

Features:

  • Highly stable
  • Utilizes integral connectors to form a near perfect airline

Specifications:

Connector type APC 3.5
Connector sex Female
Frequency range 3 to 26.5 GHz (usable to 33 GHz)
Load stability (plus connector and air line)
3 to 20 GHz <0.004
20 to 26.5 GHz <0.004
Power Rating
Average 1 W
Peak 1 kW
Load element travel Half of a wavelength at 3.0 GHz (5 cm minimum)
Dimensions
Length 25.6 cm (10.1 in)
Weight 120 g (4.25 oz)
Parameter Equipment Operation Equipment Storage and Shipping
Temperature +15 °C to +35 °C (or network analyzer operating temperature range, whichever is less) -40 °C to +70 °C
Relative Humidity <80% relative humidity at 40 °C <90% relative humidity at 40 °C
Altitude <4,570 m (15,000 ft) <15,300 m (50,000 ft)

Please contact us for more information on the HP / Agilent 911E Sliding Load

Similar Test Equipment

Rent / Lease Transistor Devices XBL-600-200-6000 6 kW DC Load
Transistor Devices
XBL-600-200-6000
6 kW DC Load

Rent or Lease Instek PEL-300 300W DC Load
Instek PEL-300
60V, 300W, 6A DC Load

Rent or Lease Kikusui PLX153W 120V, 200A, 1200W DC Load
Kikusui PLZ1003W
120V, 200A, 1200W DC Load

Rent or Lease PPM EL-3000-300-60 3000W DC Load
PPM EL-3000-300-60
60V, 300A, 3000W DC Load

Rent or Lease the Chroma 63209 15 KW DC Load
Chroma 63209
15 kW DC Load

Forms Terms & Conditions Privacy Notice Home Page Terms of Use
Copyright © 1996-2010  |  Advanced Test Equipment Rentals  |  All Rights Reserved