 |
|
HP / Agilent E5071B ENA RF Network Analyzer, 300 kHz to 8.5 GHz
The HP / Agilent E5071B ENA RF Network Analyzer dramatically improves measurement accuracy and responds to current and future test needs. Because it performs up to 125 dB 2 wide dynamic range at 10 Hz IFBW, the sweep speed can be faster at the required dynamic range. The trace noise is lowered to 0.001 dB rms at 3 kHz IFBW. It delivers accurate pass band ripple measurement of a filter. The ENAs excellent measurement performance improves test quality and repeatability as well as test throughput, which affect production yield and the overall cost of test.
The HP / Agilent E5071B ENA RF Network Analyzer perform fast and accurate RF component measurements for both R&D evaluations and production testing. The Agilent E5071B (300 kHz to 8.5 GHz) model offers integrated 2, 3, or 4 test ports, and enable various component measurements from 2-port filters to multiport devices like duplexers and couplers. The ENA offers built-in balanced measurements, matching circuit simulation, and port characteristic impedance conversion. In addition, the ENA provides frequency-offset and harmonics measurement capabilities. These functions increase engineering efficiency by delivering fast and accurate measurement results for the most advanced RF components, such as balanced SAW filters, differential amplifiers, mixers, converters, and front-end modules.
HP / Agilent E5071B Features:
- Fast multiport measurements: 9.6 µs/point
- High accuracy 125dB dynamic range1 and 0.001 dB rms trace
- Integrated 2, 3, or 4 test ports
- Full-port SOLT and TRL/LRM calibration
- Built-in balanced measurement and fixture simulator
- Time domain analysis with gating
- Mixer evaluation with advanced mixer calibration techniques
- Up to 9 ports using the multiport test set
- 4-port electronic calibration (ECal) support
- Bundled Microsoft® Visual Basic® for Applications (VBA)
HP / Agilent E5071B Specifications:
| Test
Frequency |
300
kHz to 8.5 GHz |
| Max
port output power |
-50
to 10 dBm |
| Test
set |
S-parameter
test set |
| Number
of test ports |
2 |
3 |
4 |
| Measurement
parameters with balanced conversion |
S11 - S22 |
S11 - S33 |
S11 - S44 |
|
|
Mixed
mode S-parameter, amplitude/phase imbalance |
| Number
of points |
2
to 1601 |
| Typical
system dynamic range |
120
dB to 10 Hz BW (3 MHz to 1.5 GHz)
122 dB to 10 Hz BW (1.5 MHz to 3 GHz)
121 dB to 10 Hz BW (3 MHz to 4 GHz)
117 dB to 10 Hz BW (4 MHz to 6 GHz)
112 dB to 10 Hz BW (6 MHz to 7.5 GHz)
105 dB to 10 Hz BW (7.5 MHz to 8.5 GHz)
(Response & isolation calibration) |
| Trace
noise (magnitude) |
0.001
dBrms at 3 kHz BW (3 MHz to 3 GHz)
0.0012 dBrms at 3 kHz BW (3 GHz to 4.25 GHz)
0.0036 dBrms at 3 kHz BW (4.25 GHz to 7.5 GHz)
0.006 dBrms at 3 kHz BW (7.5 GHz to 8.5 GHz)
(0 dBm source power, through measurement) |
|
