Anritsu MS2721A Handheld Spectrum Master - 100 kHz - 7.1 GHz

The Anritsu MS2721A Handheld Spectrum Analyzer continuous frequency coverage from 100 kHz to 7.1 GHz gives the wireless professional the performance needed for the most demanding measurements in harsh RF and physical environments. Whether your need is for spectrum monitoring, WiFi and WiFi5 installation and testing, RF and microwave signal measurements or cellular signal measurements, the Anritsu MS2721A Spectrum Master gives you the tool you need to make the job easier and more productive.

Anritsu MS2721A Features:

10 Hz to 3 MHz RBW range
Very low phase noise (–100 dBc/Hz maximum at 10 kHz offset at 7.1 GHz)
Built-in preamplifier
65 dB step attenuator
Input protected to 20 watts
True RMS detection
Built-in AM/FM/SSB demodulator
3+ hours of battery life
2.9 kg (<6.4 lbs)

Anritsu MS2721A Specifications:

Frequency Range	100 kHz to 7.1 GHz (useable down to 9 KHz)
Tuning Resolution	1 Hz
Frequency Reference
	Aging:	±1 ppm/yr.
	Accuracy:	±1 ppm (25C ± 25C) + long term drift
	Frequency Span:	10 Hz to 7.1 GHz plus 0 Hz (zero span)
	Span Accuracy:	Same as frequency reference accuracy
	Sweep Time:	Minimum 100 ms, 50 µs in zero span
	Sweep Time Accuracy:	±2% in zero span
	Sweep Trigger:	Free run, Single, Video, External
	Resolution Bandwidth:	(–3 dB width) 10 Hz to 3 MHz in 1-3 sequence ± 10%, 8 MHz demodulation bandwidth
	Video Bandwidth:	(–3 dB) 1 Hz to 3 MHz in 1-3 sequence
	SSB Phase Noise:	–100 dBc/Hz max at 10, 20 and 30 kHz offset from carrier. –102 dBc/Hz max at 100 kHz offset from carrier.

Please contact us for more information on the Anritsu MS2721A Handheld Spectrum Master

Similar Test Equipment
Rohde & Schwarz FSL6 RF Spectrum Analyzer	Agilent N1996A Spectrum Analyzer	Rohde & Schwarz FSH3 Spectrum Analyzer	Agilent E8802A PNA Network Analyzer	Agilent N9310A RF Signal Generator