Rentals - Sales - Service
Advanced Test Equipment Rentals
Toll Free: 1-800-404-ATEC (2832)
Follow ATEC on LinkedInFollow ATEC on YouTubeFollow ATEC on TwitterFollow ATEC on Facebook



Home > Equipment > Power Supplies
Home > Manufacturers > California Instruments

California Instruments 1501TC

California Instruments 1501TC Single-Phase 1.5 kVA Power Source

Single-Phase 1.5 kVA Power Source

  • Power Output: 1500 VA at 130 to 110 volts rms output with power factor of unity to ±0.7
  • Output Voltage Ranges: 0 to 32.5 volts rms, 0 to 65 volts rms, 0 to 130 volts rms and 0 to 260 volts rms
  • Total Harmonic Distortion: less than 0.3% distortion at midband (200 to 600 Hz), and less than 0.5% distortion from 45 Hz to 5 KHz.
  • Amplitude Stability: ±0.25% for 24 hours at constant line, load and ambient temperature conditions.
  • Load Regulation: ±1% over the range from 45 Hz to 5 KHz when tested at unity power factor
  • Full Power Frequency Range: 45 Hz to 5 KHz.
  • AC Input Line: 210 to 250 volts rms.  Unit may be wired for the following single phase voltages on special order: 115 VAC, 208 VAC, 220 VAC and 240 VAC
  • AC Input Frequency: 48 to 65 Hz
  • AC Input Power: 5000 watts maximum under worst case line and full rated worst case load conditions
  • Dimensions: 14" H x 19" W x 21" D
  • Approx. shipping weight: 210 lbs.

Please contact us for more information on the California Instruments 1501TC Single-Phase 1.5 kVA Power Source

Similar Test Equipment

Rent CA Instruments 2001RP 2 kVA Power Source
CA Instruments 2001RP
2 kVA Power Source

Rent Pacific Power 320ASX

Pacific Power 320ASX
AC Power Source

Rent California Instruments 1.5kV AC Power System
California Instruments 1503L
1.5kV AC Power System

Lease or Rent Pacific Power 2.5 kV Power Supply
Pacific Power 125AMX
2.5 kV Power Supply

Rent or Lease AC Power Supply
Kikusui PCR500L
500 VAC Power Supply

Forms Terms & Conditions Privacy Notice Home Page Terms of Use
Copyright © 1996-2010  |  Advanced Test Equipment Rentals  |  All Rights Reserved