Fluke Ti25

Fluke Ti25 9 Hz Thermal Imager

The Fluke Ti25 9 Hz thermal imager is a handheld imaging camera used for predictive maintenance, equipment troubleshooting, and verification. The Fluke Ti25 produces thermal and visual images on a 640 x 480 display. Thermal and visual images are displayed on the Imager LCD and can be saved to an SD Memory card. Transferring images to a PC is accomplished by removing the SD memory card and connecting it to a PC through the included card reader. SmartView™ software is included for image analysis and report generation from these saved images.

Both thermal and visual images can be presented simultaneously as a full fusion (thermal displayed over visual) image or as a Picture-In-Picture (PIP) image. The thermal image temperature range starts at -20°C, and goes up to +350°C.

Imager power is supplied by a rechargeable Nickel Metal-Hydride battery. A full visual image (640 x 480) can be displayed and stored with each IR image. The Ti25 also provides voice recording for annotating saved images.

Fluke Ti25 Specifications:

Fluke Ti25 Temperature
Temperature measurement range (not calibrated below -10 °C)	-20 °C to +350 °C (-4 °F to + 662 °F) (two ranges)
Accuracy	± 2 °C or 2% (whichever is greater)
On-screen emissivity correction	Yes
Fluke Ti25 Imaging performance
Field of view	23° x 17°
Spatial resolution (IFOV)	2.5 mRad
Minimum focus distance	Thermal lens:	15 cm (6 in)
	Visible (visual) light lens:	46 cm (18 in)
Focus	Manual
Image frequency	9 Hz refresh rate
Detector type	160 x 120 focal plane array, uncooled microbolometer
Infrared lens type	20 mm F = 0.8 lens
Thermal sensitivity (NETD)	≤0.1 °C at 30 °C (100 mK)
Infrared spectral band	7.5 µm to 14 µm
Visual camera	640 x 480 resolution
Fluke Ti25 Image presentation
Palettes	Ironbow, blue-red, high contrast, amber, hot metal, grey
Level and span	Smooth auto-scaling and manual scaling of level and span
Minimum span (in manual mode)	2.5 °C (4.5 °F)
Minimum span (in auto mode)	5 °C (9 °F)
IR-Fusion® information	Full infrared with MAX, MID, or MIN automatic blending; and picture-in-picture with MAX, MID, or MIN automatic blending (Visual and IR blending)
Picture-In-Picture (PIP)	Three levels of on-screen IR blending displayed in center 320 x 240 pixels
Full screen (PIP off)	Three levels of on-screen IR blending displayed in center 640 x 480 LCD
Fluke Ti25 Voice annotation
Voice annotation	60 seconds maximum recording time per image
Fluke Ti25 Image and Data Storage
Storage medium	SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60 seconds voice annotations or 3000 basic (.bmp) IR images)
File formats	Non-radiometric (.bmp) or fully-radiometric (.is2)
	No analysis software required for non-radiometric (.bmp) files
Export file formats w/SmartView™ software	JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF

Please contact us for more information on the Fluke Fluke Ti25 9 Hz Thermal Imager

Similar Test Equipment
Fluke TiR Thermal Imager w/ IR Fusion	Fluke Ti32 Thermal Imager	Flir BCAM Infrared Camera	Fluke Ti30 Thermal Imager	Flir ThermaCAM B2 Infrared Camera