 |
|
IDEAL LANTEK 6 LAN Cable Certifier
The IDEAL LANTEK 6 is a fully compliant
Category 6/ISO E cable tester with a frequency range up to 350 MHz.
Performing full Category 6/ISO E Autotests with graphs in approximately 25
seconds, the IDEAL LANTEK 6 will get you through your jobs faster than
ever.
LANTEK 6 comes with a pair of Category
6/ISO E channel adapters. These channel adapters fit into the case of the
unit and are locked in place. This creates a stable and repeatable testing
platform while eliminating bulky adapters extending beyond the end of the
unit. By simply plugging in a Category 6/ ISO E reference patch cord to
the channel adapter, you can now perform Category 6/ISO E permanent link
testing. Should the plug ever wear out the patch cord is replaced rather
than the entire assembly reducing lifetime cost of ownership.
Among the LANTEK 6 accessories are the the
industry's most advanced fiber options, FIBERTEK and TRACETEK. FIBERTEK
enables loss, length, bi-directional testing over two fibers, and talkset
over fiber capabilities for 850 and 1300 nm Multimode and 1310 and 1550 nm
Singlemode fiber. TRACETEK is the first fiber accessory for a copper
tester that will trace a fiber run, locate distance to events along the
fiber, and measure the magnitude of the event. This capability can
eliminate the need for a more costly OTDR in campus network environments.
Please consult your sales representative for price and availablity on the
accessories.
Features:
- The industry's most capable CAT 6/ISO E hybrid
copper/fiber certifier
- Tests applications up to 350MHz, well beyond CAT
6/ISO E draft specifications.
- Brightest color screen in the industry.
- Industry's most advanced fiber test options FIBERTEK
and TRACETEK.
- ETL Certified Level III Accuracy.
- The industry's most capable CAT 6/ISO E
hybrid copper/fiber certifier
- Tests applications up to 350MHz, well
beyond CAT 6/ISO E draft specifications.
- Tests applications 550MHz, well beyond
CLASS E/Category 6 range of 0-250MHz
- Brightest color screen in the industry.
- Industry's most advanced fiber test
options FIBERTEK and TRACETEK.
- Snap in FIBERTEK Adapters and test
Singlemode Fiber backbones bi-directionally, with one
or two wavelengths over either one or two fibers Or snap in FIBERTEK
Multimode adapters and test gigabit Ethernet and other new ANSI
applications on Multimode Fiber links, test Multimode Fiber backbones,
bi-directionally, with one or two wavelengths over either one or two
fibers. Please consult your sales representative
for price and availablity on the accessories.
Specifications:
| LANTEK
6 |
Range |
Resolution |
Accuracy |
| Length
(50- 100 Ω cable) |
0
- 2000 Ft |
1
ft. |
±(3%
+ 3 ft.) |
| Delay |
0
- 8000 ns |
1
ns |
±(3%
+ 1 ns) |
| Average
Impedance |
35
- 180 Ω |
0.1
Ω |
±(3%
+ 1 Ω) |
| Capacitance
(Bulk) |
0
- 100 nF |
1
pF or 3 dig |
±(2%
+ 20 pF) |
| Capacitance |
0
- 100 pF/ft. |
0.1
pF |
±(2%
+ 1 pF) |
| DC
Loop Resistance |
0
- 200 Ω |
0.1
Ω |
±(1%
+ 2 Ω) |
| Attenuation |
1
- 350 MHz |
0.1
dB |
Level
III* |
| NEXT |
1
- 350 MHz |
0.1
dB |
Level
III* |
| Return
Loss |
1
- 350 MHz |
0.1
dB |
Level
III* |
| ELFEXT |
1
- 350 MHz |
0.1
dB |
Level
III* |
| Noise
Floor |
<
-90 dB |
|
|
| Dynamic
Range |
>
90 dB |
|
|
* Level III only specified to 250 MHz
| Autotest
Storage Capacity (Internal Memory)* |
| No
Graphics |
Up
to 6,000 Tests |
| With
Graphics |
Up
to 100 Tests |
| Autotest
Storage Capacity (External 32 MB Flash)* |
| No
Graphics |
Up
to 24,000 Tests |
With
Graphics
* Depending on Autotest Categories |
Up
to 400 Tests with 32 MB
Up to 3,200 Tests with 256 MB |
| Autotest
time (250 MHz) |
Approx.
25 seconds |
| Standard
Test Compliance |
ANSI/TIA/EIA 568B, Category 6
(Draft), ISO C/D and ISO E (draft), AS/NZS 3080, IEEE 802.3
Ethernet, EN50173, EN50173.A1 |
| Cable
Types |
UTP/ScTP/FTP; CAT 3/5e/6; ISO C/D/E
(Channel, Basic, and Permanent Link) IBM STP Type 1,2,6, Coax |
|
