 |
|
500 Watts, Solid
State RF Amplifier
Features:
- Digital Display
Monitors: Power Supply Currents, Voltage, Forward RF Power, Reflected
RF Power
- Status
Indicators: Power On, Standby, Operate
- Faults: Overcurrent,
VSWR Overload, Thermal Overloads, Air Flow
- Controls: Power
On/Off, Standby, Operate, Fault Reset, Local/Remote
- Designed to meet
the safety requirements of the IEC-348 and Underwriters Labratory of
American Standards
- Broadband
Coverage
- Applications
Include: MIL-STD-461/462, RTCA/DO-160, SAE Specifications, Radiated
Susceptibility, Bellcore testing, Broadband Communications
- GPIB IEEE 488 Remote Control
- Internal Pre-amplification to obtain rated output
power with an input level of 0 dBm or less
- Local/Remote Gain Control
- RF Input/Output Connectors on the Front Panel
- Internal Systems Diagnostics
- ALC, Automatic Leveling Control
- Total/Operate Elapsed Time Metering in Hours
- RF Safety Door interlock, BNC Connector
| Specifications: |
| Frequency
Range |
.01-1000 MHz |
| Rated Output Power (min. Saturated) |
500/100
Watts |
| |
500W
@ 10 kHz - 250MHz
100W @ 200MHz - 1 GHz |
| Small Signal Gain |
57/50
dB |
| Linear Power (nominal) |
55
Watts |
| Prime Power |
115 VAC + -10%, 50/60 Hz, Single Phase |
| Input/Output Impedance |
50 ohms (CSWR 2.0:1) |
| RF Input/Output Connectors |
Type N Female on Front Panel |
| RF Sample Port |
Type N Female on Front Panel |
| Modulation |
AM/FM/Pulse |
| Spurious |
-50dBc |
| Harmonics |
-20dBc nominal @ Linear Power |
|
