Kikusui KES4022A Electrostatic Discharge Simulator
The KES4022A/4021A simulator allows you to perform immunity tests on an electrical or electronic device by simulating a direct or indirect electrostatic discharge from a charged human operator.
The KES4022A/4021A is used to perform immunity testing on electric and electric devices subject
to electrostatic discharge. It is capable of performing testing conforming to IEC 61000-4-4 Standards.
It complies to the standard of immunity test that can simulate the direct or indirect discharge to the electrical device and the electronic equipment from the charged human body.
Exclusive Features for the KES4022A:
- Electrostatic discharge simulator compliant with EN/IEC 6100-4-2
- Manual Operation (single operation)
- Up to ±30 kV output
- IEC Test Level operation
- Step Operation
- Sequence Operation
Specifications:
| Discharge Method |
Contact discharge and Air discharge |
| Set Voltage |
0.00kV to 30.5KV (Guaranteed specifications: 0.50kV to 30.0kV) |
| Polarity |
Positive and Negative |
| Charge Resistor |
50MΩ (combined with the discharge gun) |
| Discharge Interval |
0.05 / 0.1s to 99.9s |
| Trigger |
Main panel trigger and Discharge gun trigger |
Type of Test |
| Manual Operation |
| IEC test level operation: level 1,2,3,4* |
| step operation: in step volage 0.01 to 30.0kV |
| Sequence operation* |
| Discharge Points |
1 point to 10 points |
| Memory operation |
Stores 20 sets of testing conditions for each operation (a total of 80 sets) |
| Wait Feature |
ON or OFF |
| Power Supply |
AC100V to 240V 50/60Hz |
| Discharge Cycle |
1 to 999/ Continuous |
| Interface |
RS232C (Option) |
*The KES4021A applies only for the setting level
*Up to 20 steps of configuration with different test conditions in a single sequence test.
Specifications of the discharge gun:
| Output Voltage |
0.00k to 30.5kV |
| Energy Storage Capacitor |
150pF ± 10% (replaceable) |
| Discharge Resistor |
330Ω ±10%(replaceable) |
| Charge Resistor |
50MΩ (with the main unit connected) |
|
