 |
|
Kikusui TOS7100M Insulation Resistance Tester
The Kikusui TOS7100M is able to perform insulation resistance testing of electronic devices based on the Electrical Appliance Control Act as well as IEC, CEE, BS, VDE, CSA and other safety standards.
Features
- Equipped with a Pass/fail judgement Function Test results can be evaluated easily by setting judgement reference values in advance
- Use of a Dual Pointer Meter - Both judgement reference values and measured values can be read independently
- Two Output Modes - In the NORMAL mode, the measuring voltage is interrupted and an NG alarm is released when an NG judgement has been made. In the CONTINUE mode, the measuring voltage is not interrupted even if an NG judgement is made, and an NG alarm is released while continuing to indicate measured values
- Provided with Remote Control Function - Both test and reset operations can be remote controlled from the outside
Specifications
| Rated Measuring Range |
500/1000 V |
| Effective Measuring Range |
500 V range: |
1M to 1000M |
| 1000 V range: |
2M to 2000 M |
| Accuracy |
1st effective measuring range: |
5% of reading |
| 2nd effective measuring range: |
10% of reading |
| Measuring Terminal Voltage |
+5, -0% of rated measuring voltage when output terminal is open |
| Indicating Meter |
Dual pointer meter, with mirror |
| Results Judgement |
Pass/fail judgement |
| Limit Value Setting Range |
Arbitrary set within effective measuring range |
| Judgement Accuracy |
±15% of set value for 1st effective measuring range |
| ±20% of set value for 2nd effective measuring range |
| Judgement Waiting-Time |
Approx. 0.3 s |
| Output Mode Selection |
NORMAL/CONTINUE |
| Line Voltage |
100V..10%, 50/60 Hz |
|
