| Waveform Output Characteristics |
- Output Channels: 2 or 1
- Output Impedance: 50 ohm, ± 5%
- Vertical Resolution: 8 bits
- Minimum Output Voltage: 10 mV p-p into 50 ohms
- Maximum Output Voltage: 10 V p-p into 50
ohms
- Offset Voltage Range: ±5 V into 50 ohm
- Output Bandwidth: 100 MHz
- Maximum Sample Rate: 400 MS/second
Trigger
- Slope: Positive or Negative
- Trigger Input Impedance: 50 ohm ± 5%
- Threshold Range: ± 2.5%
- Threshold Resolution: 20mV
- Trigger Modes: Continuous, Single, Burst, Gated
| Clock Rate |
Max. delay |
| 400 MS/s |
> 10 s |
| 40 MS/s |
> 100 s |
| 4 MS/s |
> 1000 s |
| 400 KS/s |
> 10K s |
| 40 KS/s |
> 100K s |
Trigger Sources: Manual, External, GPIB |
|
|
LeCroy LW420 WaveStation Arbitrary Waveform Generator
| Generator Mode |
Waveforms
- Sine, 1 Hz - 100 MHz
- Square, 1 Hz - 50 MHz
- Triangle, 1 Hz - 25 MHz
- Ramp, 1 Hz - 25 MHz
- Pulse, (period) 20 ns - maximum memory
- DC
|
| Arbitrary Functions |
Standard Functions
- Sine, Square, Triangle, Ramp, Pulse, DC
Equation Editor
- Waveform (array) Math
- Waveform import from digital oscilloscope or floppy
disk
- Waveform Feature Time Resolution: 100 ps
- Available Memory: 256k/channel standard,
1M Optional
- Minimum Segment Length: 64 pts
- Maximum Segment Length: Up to available memory
- Number of Links: 512 for 256k memory, 2048 for
1M memory
|
| Miscellaneous |
- Auxiliary Inputs: External Reference: 10 MHz
reference
- Auxiliary Outputs: 10 MHz reference
- Timing Marker: 1 bit of memory up to 128
transitions definable, one per channel
- Output Levels: ECL or TTL levels
- Protection: Outputs are protected to ± 5V
- Digital Output: Channel 1 only, 8 bits
- Noise/Out: From rear panel BNC connectors
- Programmability: GPIB IEEE 488.2 compatible.
Compliant with SCPI programming language.
|
|
