Advanced Test Equipment Rentals - Home Rentals - Sales - Service
Advanced Test Equipment Rentals
Toll Free: 1-800-404-ATEC (2832)
Follow ATEC on LinkedInFollow ATEC on YouTubeFollow ATEC on TwitterFollow ATEC on Facebook
Home > Equipment > Loads > DC Loads

PPM Instruments EL-3000-300-60

PPM Instruments EL-3000-300-60 Fuel Cell Test Electronic Power Load

Fuel Cell Test Electronic Power Load

The PPM Instruments EL-3000-300-60 Fuel Cell Test Electronic Power Load is an air-cooled DC electronic load used to test DC power sources, such as batteries, power supplies, generators, chargers, fuel cells and other power sources. Control is either by a front panel potentiometer or a 0 to +10 V analog control signal on standard units, with computer control options available. Rear connections provide for line power, the analog control signal, current load monitor connections and optional computer interface and load input power block.

Features

  • 1 kW to 10 kW
  • 60 to 500 Volts DC
  • Up to 1000 Amperes
  • Constant E.I.P.R
  • Air Cooled
  • FRA tests to 10KHz
  • Excellent current interrupt capability
  • Optional RS-232 or IEEE-488
  • Outstanding Control
  • Wide Ranges
  • Very low and high voltage capability
  • Very high current capability
  • Computer interface
  • Customization available

Specifications

Power 3000 W
Current 300 A
Voltage 60 V
Constant Current ± 0.35% FS Typical
Constant Voltage ± 0.1% of Reading + 0.1% of Full Scale (FS)
Constant Power ± 2% FS at Vin > 10% and I > 10% of FS
Constant Conductance (Resistance) ± 2% FS at Vin > 10% and I > 10% of FS
Current Measurement Resolution (IEEE-488 [GPIB]) 12 Bits
Current Measurement Accuracy (IEEE-488 [GPIB]) ± 0.2% FS
Voltage Measurement Resolution (IEEE-488 [GPIB]) 12 Bits
Voltage Measurement Accuracy (IEEE-488 [GPIB]) ± 0.2% FS
Mode Selection (IEEE-488 [GPIB]) All modes (E, I, P or I/E)
Control (IEEE-488 [GPIB]) I, E, P or I/E 10 Bits
Current Measurement Resolution (RS-232) 10 Bits
Current Measurement Accuracy (RS-232) ± 0.2% FS
Mode Selection (RS-232) Manual
Control (RS-232) Controls any mode selected by front panel
External Analog I/P (Range 0 to Full Scale of Parameter) 0 to 10 Volts DC, or any waveform
External Analog I/P (Frequency Response) DC to 10 KHz
Transient Response (Constant I/E/P/S) 10 µs
100 µs
200 µs
400 µs
Environmental Temperature 0 - 40 °C
Environmental Humidity ≤ 95% Non Condensing
Environmental Derating of Max. Power 2% of full scale per °C
I/E/P Protection 105% of Full Scale Cutout with Indicators
Thermal Protection 85°C Internal Cutout with Indicator
Undervoltage Protection 50 mV to FS Continuous
Please contact us for more information on the PPM Instruments EL-3000-300-60 Fuel Cell Test Electronic Power Load
Similar Test Equipment

Rent / Lease Transistor Devices XBL-600-200-6000 6 kW DC Load
Transistors Devices
XBL-600-200-6000
6 kW DC Load

Rent or Lease Instek PEL-300 300W DC Load
Instek PEL-300
60V, 300W, 6A DC Load

Rent or Lease Kikusui PLX153W 120V, 200A, 1200W DC Load
Kikusui PLZ1003W
120V, 200A, 1200W DC Load

Rent / Lease the Chroma 63030 64 Volt, 60 Amp DC Load
Chroma 63030
64 Volt, 60 Amp DC Load

Rent / Lease the Agilent 6060B
Agilent 6060B
300 Watt DC Load
Forms Terms & Conditions Privacy Notice Home Page Terms of Use
Copyright © 1996-2010  |  Advanced Test Equipment Rentals  |  All Rights Reserved