|
|
Quadtech Sentry 30 AC/DC/IR Hipot Tester
A complete dielectric testing solution, the
Quadtech Sentry 30 combines both AC and DC Hipot with insulation
resistance (IR) measurements into a single compact unit. The front panel
of the Sentry makes it easy to operate. Digital display and user friendly
control allows test parameters and limits to be set easily without the
high voltage activated.
The Sentry Series of electrical safety
testers are advanced digital hipots with load and line regulation to
ensure measurement integrity. Multistep capability allows the user to
perform up to two tests in a sequence such as AC hipot followed by IR.
The Sentry 30/35 AC/DC/IR Hipot Tester: performs AC dielectric withstand (hipot) tests, has DC hipot capability and measurement of insulation resistance. The IR measurement range is from 10M to 10GΩ with test voltages from 50 to 1000VDC.
Quick Discharge: In both the DC hipot and IR the device under test is discharged back through the HV transformer. This technique results in a rapid and safe discharge.
Ground Continuity Check: All of the Sentry units have a ground continuity check feature to determine that the resistance, between the ground blade of the power cord and any exposed metal on the product, is less than 1 ohm.
Applications
- Production Testing of Appliances, Instruments and Information Technology Equipment in Accordance with UL,IEC,TV and Other Standards such as EN60335, EN60950, EN61010, CSA C22.2 No. 1010.1, UL3111 and UL1950
- Transformer Electrical Safety Testing
- Electric Motor Safety Testing
- Variety of Electronic Components
- Testing Electronic Components
Features:
- Easy to Use
- Cost Effective Solution for Hipot and IR
- Programmable Output Voltage to 5 kV and 6 kV DC Programmable Ramp and Test Times
- Programmable High and Low Limits
- Quick Discharge of DUT in IR and DC Hipot
- Storage of 40 Tests Setups with 2 Steps per Measurement, or 80 with 1 Step
- Remote Control
- Ground Continuity Check with 1ohm Limit
- Front Panel Lockout
- Arc Detection with Programmable Limit
- Resistance Measurements from 10M to 10GΩ
|
