 |
|
Sencore VP300 VideoPro Multimedia Video Generator
The Sencore VP300 VideoPro
Multimedia Generator provides everything you need for fast and accurate
alignment of HDTV, NTSC and Computer Display video modes. The Sencore
VP300 VideoPro is the only HDTV, NTSC and Computer Display video source
you need for high-end display installation, alignment, calibration and
service. The Sencore Video Pro provides the patterns you need for black
level, white balance, focus and convergence alignment in all of the
displays operating modes. The Sencore VideoPro is portable, lightweight
and battery operated (about 8 hours on one charge) so
it goes wherever you go, ready whenever you need a reliable
video signal source.
Features:
-
HDTV and SDTV Video Formats (1080i,
720p, 480i, 480p and more)
-
4:3 and 16:9 Aspect Ratios
-
Component Video (YPbPr) and RGBHV
Video Outputs
-
Composite and S-Video NTSC/PAL Outputs
-
Computer Monitor Formats (VESA)
-
Alignment and Service Test Patterns
-
Hand-held, Portable, Battery Operated (8 hours on one charge)
Specifications:
Video Formats:
Storage: 100 Total
Factory Default Formats:
HDTV 720p59, 720p60, 1080i25, 1080i29, 1080i30, 1080p50, 1080p59, 1080p60
SDTV 480i29, 480i30, 480p59, 480p60
VESA/Mac 38 standard formats from 640x350
to 1920x1440
NTSC standard NTSC, luminance only NTSC
PAL standard PALm, luminance only PALm
Patterns
White Raster, Black Raster, Crosshatch, Overscan, Regulate, Window (8 IRE
levels), Focus, Color Bar, Split Bar, SMPTE Bar, Staircase, Checker, Pluge, Multiburst, Ramp, ANSI Gray
Horizontal Timing
Frequency: |
1 kHz to 250 kHz |
Total Pixels: |
144 to 4096 |
Active Pixels: |
16 to 4096 |
Vertical Timing
| Frequency: |
1 Hz to 650 Hz |
| Active Lines: |
1 to 4096 |
| Scan Types: |
Progressive, 2:1 Interlace |
Sync Types
Separate Digital Horizontal and Vertical Sync Digital and Analog Composite
Sync Tri-level HDTV Sync
Video Outputs
HDTV: YPbPr, RGBHV
SDTV: YPbPr, RGBHV
VESA/Mac: RGBHV
NTSC: Composite, S-Video
PAL: Composite, S-Video
Timing Accuracy: 2%
Audio Outputs
Connector: 2.5mm stereo phone jack
Signals: Left - 1 kHz tone; Right - 2 kHz tone
User Interface
Display: |
20x4 character backlit LCD |
Buttons: |
9 function buttons, 8 Menu buttons, |
2 page scroll buttons. |
Computer Interface
Type: RS-232, DTE, 9 pin D-sub
Protocol: 9600 Baud, 8-N-1, Xon/Xoff
VESA EDID/DDC Support
Reads a monitor's EDID data and displays a list
of VESA formats supported.
DDC Step function cycles through supported formats.
|
