 |
|
Reach-In Test Chamber
Designed to
provide environments in the controlled space for high, low and relative humidity testing.
Specification
- Dry Bulb Temperature Range: -17.8°C to +93.3°C
- Humidity Range: 20% to 95% over the dry bulb range of 3°C to +85°C. As
limited by a 2°C dew point
- Interior Dimensions: 20" H x 18" W x 20" D
- Input Power: 120VAC, 20A
Pro-SES II Controller - Microprocessor-Based Programmer / Controller
Features
- Eighty separate programmable steps with one or two channels and eight on/off
events per step
- Programmable high or low temperature limit alarm
- Each step can be as short as one minute or as long as 99 hours 59 minutes
- Can interloop up to 255 times and repeat entire program indefinitely
- Delay actual program starting time up to 99 days
- L.E.D. readouts that will simultaneously display step, channel, and data
- Delay timed sequence until temperature is reached -- guaranteed soak cycle
- Internal battery that will maintain memory contents if a power loss occurs
- L.E.D. indication of program status
- Program or manual control
|
