Solar 6220-4 Audio Isolation Transformer
The transformer is capable of handing up to 200 watts of audio power into its primary over the frequency range 30 Hz to 250 KHz. The turns ratio provides a two-to-one step down to the special secondary winding. The secondary will handle up to fifty amperes of AC or DC without saturating the transformer.
The Solar 6220-4 Audio Isolation Transformer was especially designed for screen room use in making conducted audio frequency susceptibility tests as required by MIL-STD-461/462 and other EMI specifications.
The transformer may also be used as a pickup device to measure low frequency EMI currents at lower levels than conventional current probes. In addition, its secondary may be used as an isolating inductor in the power line during transient susceptibility tests.
Solar 6220-4 Specifications:
| Primary |
Less than 5 ohms |
| Secondary |
One fourth the primary impedance |
| Frequency Response |
30 Hz - 250 kHz |
| Audio Power |
200 Watts |
| Dielectric Test |
600 Volts DC primary to secondaries and each winding to end bells |
| Secondary Saturation |
50 Amperes 4 kV transient voltage HV transformer |
| Turns Ratio |
Two-to-one step down |
| Secondary Inductance |
Approximately 1.0 mH |
|
