Bulk Current Injection
Probe, 2 - 400 MHz
The principal use of the bulk current injection probe is
for inducing RF current into the signal and power
cables of equipment under test to determine conducted RF susceptibility.
The injection probe can also be used as a sensor. The conductor or cable
under test is passed through the probe aperture
(window) and becomes a one-turn secondary winding, (when the probe is used
for signal injection) or a one-turn primary (when
the probe is used for current measurement).
The 9142-1N features a "clamp on "design which facilitates
installation and speeds the measurement of EMI testing.
Solar 9142-1N Specifications:
| Frequency range: |
2 MHz to 400 MHz |
| Maximum input power: |
200 watts |
| Maximum input current: |
50 Amperes |
Maximum time for
continuous
rating at full power: |
30 minutes |
Recommended
maximum
temperature rise: |
35 degrees C |
| Maximum core
temperature: |
80 degrees C |
| Turns ratio: |
1:1 |
| Input receptacle: |
Type "N"
Female |
| Weight: |
1.9 kg (4.2 lbs.) |
| Fastening: |
Thumb Screw |
|
