| Power Input |
50 mW to 70 watts as specified |
| Power Outputs |
300 Watts VHF Low Band (35 - 50 MHz), 250 or 500 Watts VHF High Band (136 - 174 MHz), 300 Watts UHF (406 - 512 MHz), 250 Watts (806 - 960 MHz) |
| Mode |
FM/CW (Linear in some models) |
| Voltage |
120/240 VAC |
| Current |
4 to 15 Amps,AC depending on model |
| Harmonic & Spurious Attenuation |
Exceeds FCC specifications |
| RF Connectors |
Type N |
| In/Out Impedance |
50Ω |
| Mismatch Capability |
Infinite SWR, Isolator is standard on 800 MHz models |
| Remote Monitoring |
SWR, overtemp,low power, fan failure, system fault, forward and reflected power, and other amplifier parameters |
| Local Monitoring |
Front panel digital display and LED indicators |
| Overtemp/SWR Protection |
Proportional reduction of output power |
| Operating Temperature |
-30° to +50° degrees C. Ambient |
| Duty Cycle |
Continuous |
| Storage Temperature |
-40° C to +85° C |
| Storage Humidity |
0% - 95% RH (Non-Condensing) |
| Operating Humidity |
0% - 80% RH (Non-Condensing) |
