|
|
 |
- Built-in spectrum analyzer (100 kHz to 7.1 GHz)
- Built-in cable and antenna analyzer (10 MHz to 4 GHz, 10 MHz to 6 GHz optional)
- Built-in power meter (10 MHz to 7.1 GHz)
- Power monitor (100kHz to 50 GHz)
- Interference analyzer (100 kHz to 7.1 GHz)
|
|
|
|
|
 |
- Test and cycle a DUT under a wide range of thermal conditions with pre-set cycling sequences of up to 18 different sets.
- For 24 hr/ 7 day test environments, the TP04300A's high capacity airflow and DUT thermal precision ensure high throughput with consistent repeatability. Operator's Mode ensures quick set-up for testing at up to three pre-set temperatures.
|
|
|
|
|
 |
- Analyze Gigabit and Wireless LANs to solve problems fast
- 10/100/Gig twisted pair LAN interface
- Gigabit fiber SFP LAN interface
- 802.11 a/b/g wireless LAN analysis
- Monitor network traffic and switch interfaces
- Discover devices, networks, VLANs, access points, mobile clients and more
- RFC 2544 and ITO network performance measurement
|
|
|
|
|
 |
- Excellent Performance and
Reliability
- 15 kW DC Power Supply
- 300 Volts, 48 Amps
- User Friendly
|
|
|
|
|
 |
- Full-color graphical user interface
- Powerful field diagnostics
- Bluetooth® communication
- Long-lasting Lithium-Ion power module
- Universal support for HART ® and FOUNDATION fieldbus devices
|
|
|
|
|
 |
- Resolution: 0.1 Hz
- Power Slope: 0 to 0.5 dB/GHz
- Internal Reference: 100 MHz
- Aging Rate: < 1 X 10-8/day
- Temperature Stability: < ± 2 X 10-8/ºC
- 10 MHz Reference Output: TTL level into 50Ω
- External Reference Input: 10 MHz or 100 MHz ± 1ppm > - 5 dBm into 50Ω
- High Stability Time Base: 10 MHz
|
|
|
|
|
 |
- Frequency Range: 7.5-18GHz
- Min Power Out: 300 Watts
- Min Sat Gain: 55dB
- Max NF: 35dB
- Spurious Outputs: -40 dBc, maximum
|
|
|
|
|
 |
- Modular, expandable system
- Surge voltage to 6.6 kV for overtesting
- Easy to use 7” color touch screen
- IEC and ANSI coupling methods
- DTA (Direct Test Access) provides
fast standard test settings
- Parameters can be changed while
test is running
|
|
|
|
|
 |
- Temperature Range: -20 °C to +600 °C (-4 °F to +1112 °F)
- Field of View: 23 ° x 17 °
- Resolution: 320 X 240
- Iindustrial performance 2.0 megapixel
|
|
|
|
|
 |
- 250 kHz to 3 or 6 GHz (settable down to 100 kHz)
- +13 dBm @ 1 GHz output power
- ≤ -121 dBc/Hz (typ) phase noise at 1 GHz and 20 kHz offset
- AM, FM, øM, and pulse
- Digital step and list sweep with simultaneous switching of frequency, power, and waveform
|
|
|
|
|
 |
- Food & IngredientsAgricultural, forestry, and fishery products
- Building materials
- Medical and scientific uses
- With repeatability within ΔE*ab 0.07 and excellent inter-instrument agreement within ΔE*ab 0.8, this product delivers high levels of accuracy
- A user calibration function allows even higher levels of precision to be achieved.
- Up to 2,000 data can be stored
|
|
|
|
|
 |
- Up to 24 Mpts/Ch (48 Mpts for 2 Ch)
- Up to 10 GS/s on 4 Channels (20 GS/s for 2 Ch)
- 1, 2, and 3 GHz Bandwidths
- 1 MO and 50 O Input Paths
- X- Stream Powered Technology
- Touch Screen and Front Panel User Interface
- 10.4" SVGA Display
- Zoom and Multi-Zoom Display
|
|
|
|
|
 |
- Improve quality of service through preventative maintenance activities on antennas, before they become service-affecting
- Quickly analyze the most important antenna and transmission line problems
- Easy-to-Use Distance-to-Fault (DTF) measurements for locating antenna and transmission line trouble
- Advanced calibration technique speeds and simplifies your measurements by allowing a single calibration for use across entire frequency range
- Modular instrument for handheld NetTek Y400, which allows for easy future expansion for new function
|
|
|
|
|
 |
- Test voltages of 250V, 500 V, 1000 V, 2500 V, and 5000 V
- Capable of testing in 50V increments between 250V and 1000V and 100V increments between 1000V and 5000V
- Measures 0 to 1 Tera-Ohm
- Warning voltage function alerts the user that line voltage is present and gives the voltage reading up to 600 V AC or DC
- Guard system eliminates the effect of surface leakage current on high-resistance measurements
|
|
|
|
|
 |
- Improve quality of service through preventative maintenance activities on antennas, before they become service-affecting
- Quickly analyze the most important antenna and transmission line problems
- Easy-to-Use Distance-to-Fault (DTF) measurements for locating antenna and transmission line trouble
- Advanced calibration technique speeds and simplifies your measurements by allowing a single calibration for use across entire frequency range
- Modular instrument for handheld NetTek Y400, which allows for easy future expansion for new function
|
|
|
|
|
 |
- 500 MHz, 4 channels, 4 GSa/s sample rate
- Triggering and hardware-accelerated decode for I2C, I2S, SPI, CAN, LIN, and RS-232/UART option available.
- 8 Mpts acquisition memory standard
- Up to 100,000 waveform per second real-time update rate
- High-definition XGA (1024 x 768) display with 256 levels of intensity grading
|
|
|
|
|
 |
- 1 kW output Power
- Min Sat Gain: 60 dB
- Digital Display Monitors: Power Supply Currents, Voltage, Forward RF Power, Reflected RF Power, Total Hours, Operate Hours
- Status Indicators: Power On, Standby, Operate
- Faults: Overcurrent, VSWR Overload, Thermal Overloads, Power Supply
|
|
|
|
|
 |
- Spectrum Analysis
- Safety Evaluation
- UMTS P-CPICH Demodulation
- Level Recorder
- Scope
|
|
|
|
|
 |
- Robust edge protection, stable carrying handle
- Easy operation
- Four hours operating time on battery power
- Storage of up to 256 traces and setups
- Easy data transfer to PC
- High measurement accuracy
- Best RF characteristics in its class
|
|
|
|
|
 |
- Frequency Range: 2.5 GHz - 7.5 GHz
- Output Power: 500 W, 57.0 dBm
- Extensive diagnostic capabilities
- Advanced thermal design
- Compact size
|
|
|
|
|
 |
- Up to six channels configurable as required, for example AC input plus 5 DC outputs or three-phase input and output.
- Basic accuracy: 0.02% of reading
- Accurate on all waveforms.
- Accurate at low power factors. (<0.01)
- Bandwidth: 10 MHz
|
|
|
|
|
 |
- Measurement of TRMS voltages up to 1000Vrms AC/DC for two, three, four or five-wire systems
- Measurement of TRMS currents up to 6500Arms (sensor dependant)
- Measurement of DC current up to 1400ADC (with MR193 probe)
- Frequency measurement (40 to 69Hz systems)
|
|
|
|
|
 |
- Frequency Response: 100 kHz - 60 GHz
- Sensivity: 0.4–1000 V/m
- Sample Rate: 1-60 Samples / sec
|
|
|
|
|
 |
- Power Line testing done from the ground
- No bucket man needed, saves time, prevents risk of arcing or other injuries
- Full Measurement from tower legs
- 3-Point Fall-of-Potential measurement
- 3-Point earth coupling measurement
- Earth coupling testing
- Automatic recognition of all electrode connections and their resistance value
|
|
