Ameritec AM1 plus D1 Bulk Call Generator

Ameritec AM1 plus D1 Bulk Call Generator
Request Quote Print Page

The Ameritec AM1 plus D1 Bulk Call Generator is a multiple port, programmable, telephone call generator/call terminator with coincident recording of attempts, average dial-tone delay, dial tone delays, no dial tones, no rings, no confirmation tones, average post-dial delay, completions and run time data.

  • Construction: Modular, plug-in printed circuit boards.
  • Capacity: From 1 to 30 Originate and Terminate Ports ( maximum capacity 450 Originate and 450 Terminate ports when chaining multiple sets).
     

Specifications:

ELECTRICAL

Originate Ports

Types: Loop start, ground start, 2 and 4-wire E&M, and T1 (DS1 1.544 Mbps, 24 Channel, D3/D4 format, DSX1 levels).

Impedance: 900 Ohms AC (1200 Ohms DC loop resistance simulated) or 600 Ohms AC (600 Ohms DC loop resistance simulated).

Signaling: Dial pulse; multi-frequency (MF), both analog and digitally-generated; and dual tone multi-frequency (DTMF / Touch Tone), with either shared tone generator or (for loop/ground start Line Cards) with individual Line Card tone generators.

 


Terminate Ports

Types: Loop start (1 R.E.N.), 2 and 4-wire E&M, and T1.

Incoming Call Detect: Senses ringing (or equivalent) energy and trips ringing (shorts loop with 1200 ohms DC, 600 ohms optionally, impedance for loop ports).  E&M and T1 ports perform programmed wink/delay sequence before answering.

T1 Ports: DS1, 1.544 Mbps, 24 Channel, D3/D4 format, DSX1 levels, E&M signaling emulation.

 


Data Collection

Registers: There are ten (10) data collection registers for each line as listed below:

  • Attempts
  • Average Dial-Tone Delay
  • Dial Tone Delay
  • No Dial Tone
  • No Ring
  • No Tone
  • Average Post-Dial Delay
  • Completions
  • Run Time
  • Terminations

Register Capacity: Each counting register will accumulate counts to 65535.