Baur Syscompact 2000 M Cable Fault Location System

Baur Syscompact 2000 M Cable Fault Location System
Request Quote Print Page
Datasheet
The cable fault location system Syscompact 2000 M can be used for fault pre-location at cable systems up to 65 km length. The surge generator can be used in automatic repetitiv load to enable acoustic pinpointing. The combination of IRG 2000 and surge generator SSG 16 provides the detection of low- and high-ohmic as well as intermittent faults.

The Syscompact 2000 M is light weighted and highly transportable and therefore optimal for onside use. Low dimensions enable easy transportation. All measurement couplings as listed below are fully integrated in the unit.

Features:

  • Light weighted and highly transportable
  • 4 fault location methods (measuring couplings fully integrated into the unit)
  • Up to 16 kV surge and DC voltage (8 kV / 16 kV range)
  • Output power 1000 joule
  • Repetitiv pulse mode (up to 20 pulses /min)
  • Manual and automatic pulse mode
  • Programmable output voltage
  • Menu guidance in different languages

Specifications:

TDR output voltage of transmitting pulse 10 – 60V
Pulse width of transmitting pulse 40ns – 10µs
Voltage withstand 400V AC (50/60 Hz)
Output impedance 10, 20, 30, 50, 80, 100, 150, 250 Ohm
Sensitivity of input divider 0 – 60 dB
Measuring ranges @ v/2=80m/µs 0 – 65 km (0 – 213,000 ft)
Accuracy 0.2 %
Sampling rate 200 MHz (5 ns)
Resolution 0,4m
Propagation velocity v/2 50 – 150µs
Number of echograms memories 100
IRG 2000 LCD – TFT Colour display 320 x 240 pix. (121mm x 92mm – 6”)
Pulse voltage 1 – 8kV and 1 – 16kV
Impact energy 1024 Joule
Pulse output Single pulse, 10 and 20 pulses/min
DC voltage 0-16kV
Display pulse voltage Lighted LCD-display 160X80
Power supply for operation and/or charging 100-120V / 207-264 V (50/60 Hz)
Operating temperature -10 – +50 °C
Storage temperature -20 – +60 °C
Type of protection IP43 Dropwater and contaminant protected