Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls. Voltages of several 1,000 volts are generated. dito is the most advanced ESD tester to simulate ESD pulses as per EN/IEC 61000-4-2 and other standards requirements.
Features:
-
Most ergonomic design
-
Light weight (940g)
-
Interchangeable discharge tips
-
Interchangeable R/C networks
-
Power booster to perform long duration tests
-
Library of standard test routines
-
Test voltage measurement and control
-
Various test routines for testing and evaluation
Specifications:
|
Test Levels |
|
CD mode |
500V - 10,000V +/-5% |
|
AD mode |
500V - 16,500V +/-5% |
|
Resolution |
100V steps |
|
Holding time |
More than 5 seconds |
|
Polarity |
Positive, negative |
|
Test voltage |
measured, indicated in the display |
|
Trigger |
|
Single mode |
Release of single pulses |
|
Continuous mode |
Continuous discharge up to 20Hz (AD) and 10Hz (CD) |
|
Pulse release via software |
Remote control from computer via fiber optic link (USB) |
|
Test Routines |
|
Easy Zap |
Test based on standard levels |
|
Quick Zap |
All test parameters are adjustable during test; fast and easy-to-use |
|
Evaluation |
Air discharge with 20Hz; for test point evaluation on the DUT |
|
Standard Test routines |
As per EN/IEC 61000-4-2, EN 61000-6-1/-6-2 |
|
Set-up |
Parameters, standard levels, etc. |
|
Displays and Controls |
|
Display |
LCD graphic display; 128 x 64 pixels |
|
Operation |
5 function keys, 2 cursor keys, pulse trigger |
|
Operation |
|
Manual |
Via function keys |
|
Remote control |
Via built-in optical interface |
|
Voltage Supply |
|
Battery (ACCU) |
More than 50,000 pulses @ 16.5kV; automatic power-off after 10 minutes if not operated |
|
Mains supply |
Via mains supply adapter (MAD) |
|
General Data |
|
Weight |
940 gramms incl. battery |
|
Case material |
ABS; non-inflammable as per UL 94VO |
|
Temperature |
5°C - 40°C (operation conditions) |
|
Rel. humidity |
20% - 80% (operation conditions) |
|
Battery charger |
100V - 240V +/-10%; 50/60Hz Charging time less than 1.5 hours |