-
Safe, Fast, Efficient
-
Fully programmable test parameters
-
Digital display
-
Performs an AC dielectric strength (Hipot) test concurrent with a ground continuity test
-
Applies a test potential of up to 5000 VAC at 50 milliamps (user programmable )
-
Performs tests in full compliance with UL, VDE, BSI, IEC, CSA, and other test standards
IEEE-488 BUS-compatible - enables data logging during each test, and remote programming of:
-
Test Voltage
-
Test Time
-
Voltage Ramp Rate
-
Real Current Trip Point
-
Total Current Trip Point
-
Under Current Trip Point
Detects and indicates the following events:
-
Test Ready (Security Chassis Ground Sensed)
-
Test in Progress
-
Test Passed
-
Test Failed:
-
Arcing
-
Excessive Total Leakage Current
-
Excessive Resistive Leakage Current
-
Under Current
-
Lack of adequate Chassis Ground
Superior Safety Features
-
Visual and Audible alert indicating Hipot test in progress
-
Low Current Security Chassis Ground Circuit (ensures Device Under Test has ground connection of 0.5 ohms between chassis and power cord ground pin)
-
Fast HV shutdown within 2 milliseconds of HV test automatically on test failure or on command
Specifications
-
Output Test Voltage*: 100 VAC - 5K VAC
-
Output Voltage Ramp Time*: 50 V/sec to 5k V/sec
-
Total Current Trip Point*: 50 mA (maximum)
-
Real Current Trip Point*: 5 mA (maximum)
-
Under Current Trip Point*: 5 mA (maximum)
-
Test Time*: 1 sec - 100 sec
-
Shutdown Time: 2 milliseconds
-
Arc Detection: Arc duration 10µS or greater
-
Ground Continuity: Low current ( 1.5 Amp @ 1.5V )
-
Input Power Required: 115 / 230 VAC ± 10%, 47 - 63 Hz, 250 watts maximum
* User Programmable