T&R 100ADM mk4 Current Injection System

Rent T&R 100ADM mk4 Current Injection System
Request Quote Print Page
Manual Datasheet Other1
The T&R 100ADM mk4 Current Injection System provides commissioning and maintenance engineers with a flexible system for testing protective systems. It has an easy to understand panel layout and a simple user interface. The status of every function can be seen at a glance, and there are no complex menus to navigate. The 100ADM mk4 keeps the familiar user interface of previous models but adds a new metering system that accurately measures the RMS of a single cyle. It also features a new current limit mode to provide very fine control of very low currents, even into low impedance loads. Current limit mode also assists in testing self-powered overcurrent protection as fitted to many 11kV ring man units.

The unit has a range of outputs allowing injection of currents as low as a few mA and as high as 100A. Voltages up to 240V are available on the main outputs, allowing high impedance current relays and voltage relays to be tested. Four true RMS metering ranges are provided, allowing the full scale of the meter and trip level to be set independently of the selected output. Industry standard safety connectors are used on all inputs and outputs for convenience, reliability and safety.

The 100ADM is comprehensively protected by overcurrent, duty cycle and thermal trips, and keeps the user fully informed of any trip condition.

Features:


  • Clear and simple user interface
  • 0-100A output current
  • True RMS metering with single cycle capture
  • Multi-function auto-ranging timing system
  • Auxiliary DC & AC output
  • Large back-lit liquid crystal display
  • Thermal and over-current protection
  • Compact and portable
  • Automatic mains voltage selection

Specifications:


Range Current Output @230 V
Cont 5 Min 1 Min O/C Load V
10 V 33A 67A 100A 10.5V 8.7V@100A
35 V 10A 20A 30A 36V 32V@30A
100 V 3A 6A 10A 108V 99V@10A
240 V 1A 2A 3A 276V 259V@3A
240 VDC 1A 2A 3A