FAQs

fAQs - Frequently asked questions

Click on the departments below for their list of FAQs:
     

Shipping/Receiving

 
I want to order equipment that I don't see on your website. Can you help me out?
Yes. Advanced Test Equipment Corp has relationships with a vast network of test equipment suppliers, both domestically and worldwide. Let us know your requirements, and we'll get in touch.

I am not sure what I am being charged for. Can you help me understand my bill?
See our instructional video: How to Read Your Invoice.
 
Has the equipment I ordered from Advanced Test Equipment Corp been tested?
ATEC tests all equipment in-house before sending it out. A rental is supplied with a certificate of conformance and NIST certification (if requested) at no additional cost. We also offer a separate calibration service upon customer request.
 
Can I rent or purchase items from Advanced Test Equipment Corp. even though I am not located in the United States?
Yes. We are a worldwide supplier of quality test equipment, with certain limitations. Please contact us for more information on how the international process works.
 
What is the lead time to ship my equipment after my order has been placed?
Lead times vary from 1–2 days. Please discuss your more urgent requirements with your sales representative so we can be sure to meet your expectations.
 
Can you provide international packing and shipping?
Yes; we are familiar with the complexities of certain countries' customs systems and can pack the equipment so that it arrives safely.
 
Do you offer local delivery?
Yes, we offer free local delivery and pickup around San Diego, CA. In extended areas of the county, $100 delivery and pickup are also offered. Some limitations apply. Please contact us for more details, or click here for a delivery area map.
 
How about will-call?
Yes. If you want to pick up your equipment, please reference the ATEC will-call map.
 
Will-Call Map
 
 

Accounting/Billing

 
Why did I receive an invoice? I returned the equipment.
If the equipment is not returned by the end of the billing period, the customer will be billed for the next billing period. But if the equipment is returned during the next billing period, a credit memo will be generated based on the return date and prorated by the return date. Credit will be applied to the final invoice, and the net balance will be due.

For example, if the equipment was rented for a 1-month period on the 1st of July and arrives back to ATEC on the 3rd of August, the customer will be billed for 2 full months but will receive those remaining 28 days credited back to their account. This is also applicable to bi-weekly rates.

However, when renting equipment, the customer receives it for the entire period requested. We recommend keeping the equipment until close to the end of the billing period to confirm whether additional tests are required or if results need to be confirmed.
  
Can I pay my invoices online or call in to make a payment?
We cannot accept over the phone payments. Instead, make credit card payments by logging in to your atecorp.com account or pay as a guest.
 
Can my invoices be sent electronically?
Yes, please send an email address to billing@atecorp.com or call (800) 404-2832 to provide an email address.
 
When can I expect to receive my security deposit refunded?
Upon receiving the equipment, ATEC’s lab will inspect it and notify accounting to process the refund.
 
What are your payment terms?
Prepay via MasterCard, Visa, American Express, Discover, or a wire transfer. Net 30 terms may be granted upon credit approval, but require an ATEC credit application to be completed and submitted for approval. Submit an online credit application here.
 
Do I pay for shipping charges?
Yes. If you do not have an account established with the various shipping companies, ATEC will pre-pay the charges and add the amount to your invoice. However, please also let ATEC know your desired shipping speed.
 
Do I need an RMA to return rental equipment?
No, not to return rental equipment. An RMA is only required if you are returning equipment for service.
 
How do I return rental equipment?
All rental returns must be returned PREPAID by customer to:
 
Advanced Test Equipment
Attn: Receiving Department
10401 Roselle Street
San Diego, CA 92121

Learn how to receive and return your rental.
 
Do I have to pay sales tax?
Yes, unless the equipment is used for resale and a valid resale certificate is provided or a tax exempt form is submitted to ATEC.
 
Who can I speak with regarding an invoice I received?
Contact our billing specialist at (800) 404-2832 (select Option 4, then Option 3) or email billing@atecorp.com
 
What if I cancel my rental order?
A restocking fee applies when a customer enters into a rental agreement with ATEC and subsequently cancels the order. At minimum, a fee will be assessed for $150 or 25% of the rental rate, whichever is greater. ATEC will enforce a restocking fee when ATEC shares no fault in the cancellation.
 
 

Technical Documentation

 
What should I do if I’m having a problem with a rental?
Please call us at (800) 404-2832, then select Option 3. Our technical support hours are: Monday–Friday, 7:30 a.m. to 4:30 p.m. Pacific Time. Please have the model number and serial number of the test equipment ready when calling.
 
What should I do if the test equipment that I currently have out on rent is going to be falling out of calibration?
Please call us at (800) 404-2832. Your account manager will set up a plan to get calibrated equipment to you in a timely manner.
   
Which quality management system does ATEC have implemented?
Quality is our number one priority here at ATEC. We are ISO 9001:2015 certified and possess an ISO/IEC 17025:2017 accreditation in the field of calibration from the A2LA.

For any comments or complaints, please feel free to contact us directly to fill out our company performance questionnaire.
 

Narda STS 

 
Q: How is Narda STS related to Advanced Test Equipment Corp (ATEC)?
 
 
Q: Why should I send my Narda devices to ATEC for calibration?
 
A: ATEC is an official Narda STS calibration and service center in North America, and our team would love to help you out with our top-notch service.
 
Q: What is the lead time for calibrations?
 
A: Approximately 4–6 weeks, but it can take longer on a case-by-case basis.
 
Q: What is the process to get calibrated? 
 
A: Visit our calibration page to place your order; you will receive a service order verification email with the RMA number. Upon receipt of the RMA, equipment may be sent referencing the RMA number.
 
Q: What is the address to send in my equipment?

Advanced Test Equipment
Attn: Receiving Department
10401 Roselle Street
San Diego, CA 92121
 
Q: Is the calibration for my probe included with the main device?
 
A: Not by default; probes require separate calibrations for an additional cost. Be sure to order services for all devices which require calibration.
 
Q: Do I need to send in all the accessories?
 
A: Only accessories that are included within the scope of the calibration need to be included.
 
Q: What if I need a repair?
 
A: We will need to send you a quote. Please submit your request to orderdesk@atecorp.com.
 
Q: Do you include shipping with the orders?
 
A: No, shipping is the customer's responsibility to and from our facility. When placing your order, please make sure you provide us with (1) return shipping instructions, your FEDEX or UPS account number, or pre-pay and bill; and (2) the speed at which you wish for it to be sent.
 
Q: Do you have expedited services?
 
A: No, due to a recent influx of requests we are not able to offer that service at this time.