Compliance Standards

International Test and Compliance Standards

The following standards are composed by government agencies and globally recognized organizations in every effort to prevent faultiness in technology and to provide health and safety. Without such standards and regulations, the chances of helicopters falling from the sky or even radio waves interfering with incorrect devices would all have a higher probability of occurring. Thankfully, these tests and regulations are globally recognized to maintain and improve the quality of both technological devices and the public they seek to serve. Since 1981, Advanced Test Equipment Rentals (ATEC) has been committed to providing customers with a variety of test equipment and solutions to meet these standards as well as the standards themselves to comply by them. Pre-compliance and compliance testing can be achieved with ATEC's large database of international test and compliance standards.

Aerospace & Avionics

Automotive

Commercial

Environmental Health & Safety

Military

Communications



Standards A-Z

Directory of International Test and Compliance Standards
 
  • AEN Standards
  • AEN 134: OTDR Testing Basic
  • AEN 135: Fiber Optic Testing Procedure
  • Airbus Standards
  • Airbus ABD0100.1.8: Environmental Conditions and Test Requirements Associated with Qualification
  • ANSI/ASA Standards
  • ANSI/ASA S1.4 - 1983 (R2006): Specification for Sound Level Meters
  • ANSI/ASA S1.42 2001 (R2011): Design Response of Weighting Networks for Acoustical Measurements
  • ANSI/ASA S1.43-1997 (R2007): Specifications for Integrating-Averaging Sound Level Meters
  • ANSI/BICSI Standards
  • BICSI 006-2015 Distributed Antenna System (DAS) Design and Implementation Best Practices
  • ANSI/IEEE Standards
  • ANSI C62.45: Guide On Surge Testing For Equipment Connected To Low-Voltage AC Power Circuits
  • ANSI C63.16: American National Standard Guide For Electrostatic Discharge Test Methodologies And Acc
  • ANSI C63.2: American National Standard For Specifications Of Electromagnetic Interference And Field
  • ANSI C63.4: American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-
  • ANSI/IEEE C37.90.1: Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated w
  • ANSI/IEEE C37.90: Standard for Relays and Relay Systems Associated with Electric Power Apparatus
  • ANSI/IEEE C62.41: IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits
  • ANSI/IEEE C95.1: Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electr
  • ANSI/SCTE Standards
  • ANSI/SCTE 81: Surge Withstand Test Procedure
  • ANSI/TIA Standards
  • ANSI/TIA/EIA 526-7: Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant
  • ANSI/TIA-568.1-D: “Commercial Building Telecommunications Cabling Standard”
  • ANSI/TIA-568-C.3: “Optical Fiber Cabling Components Standard”
  • ASTM Standards
  • ASTM D2247: Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
  • ASTM D3103: Standard Test Method for Thermal Insulation Performance of Distribution Packages
  • ASTM D3580: Standard Test Methods for Vibration Test of Products
  • ASTM D4332: Standard Practice for Conditioning Containers Packages and Packaging Components
  • ASTM E1171 - Standard Test Methods For Photovoltaic Modules in Cyclic Temperature and Humidity Envir
  • ASTM F2825: Standard Practice for Climatic Stressing of Packing Systems for Single Parcel Delivery
  • Boeing Standards
  • Boeing D6-16050-5: Electromagnetic Interference Control Requirements for Composite Airplanes
  • Boeing D6-16050-4: Electromagnetic Interference Control Requirements
  • CE Marking
  • CE Marking
  • DaimlerChrysler Standards
  • DaimlerChrysler DC-10540
  • DaimlerChrysler DC-10614
  • DaimlerChrysler DC-10615
  • DaimlerChrysler PF-9326
  • ECE Standards
  • ECE R10.4
  • EN Standards
  • EN 45502-1: Implants for surgery - Active implantable medical devices - General requirements for saf
  • EN 45502-2-2: Particular requirements for active implantable medical devices intended to treat tach
  • EN 50082-1: Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commerc
  • EN 50082-2: Electromagnetic compatibility - Generic immunity standard - Part 2: Industrial Environme
  • EN 50173: Information technology - Generic cabling systems
  • EN 50191: The Erection and Operation of Electrical Test Installations
  • EN 55011: Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics
  • EN 55022: Information technology equipment - Radio disturbance characteristics - Limits and methods
  • EN 61000-6: Electromagnetic compatibility (EMC) - Part 6: Generic Standards
  • EPA Standards
  • EPA Method 10: Determination Of Carbon Monoxide Emissions From Stationary Sources (Instrumental Anal
  • EPA Method 3A: Determination Of Oxygen And Carbon Dioxide Concentrations in Emissions from Stationar
  • EPA Method 6C: Determination of Sulfur Dioxide Emissions from Stationary Sources (Instrumental Analy
  • EPA Method 7E: Determination Of Nitrogen Oxides Emissions From Stationary Sources
  • EU Directive Standards
  • Directive 2013/35/EU: Occupational Exposure to Electromagnetic Fields
  • EUROCAE Standards
  • EUROCAE ED-14: Environmental Conditions and Test Procedures for Airborne Equipment
  • FCC Standards
  • FCC Part 15: Radio Frequency Devices
  • Fiat Standards
  • Fiat 9.90110
  • Ford Standards
  • Ford EMC-CS-2009
  • FORD FMC1278
  • GM Standards
  • GM GMW3097: EMC Requirements for Automotive Products
  • GM GMW3172: General Specification for Electrical/Electronic Components Environmental/Durability
  • ICNIRP Standards
  • ICNIRP 1998: Guidelines for Limiting EMF Exposure, 0 – 300 GHz
  • ICNIRP 2010: Guidelines for Limiting EMF Exposure, 1 Hz – 100 kHz
  • IEC CISPR Standards
  • CISPR 11: Industrial, scientific and medical equipment
  • CISPR 12: Vehicles, boats, and internal combustion engine driven devices
  • CISPR 14-1: Electromagnetic compatibility - Household Appliances
  • CISPR 14-2: Electromagnetic compatibility - Part 2: Immunity
  • CISPR 16-1-1: Measuring apparatus
  • CISPR 16-1-3: Ancillary equipment – Disturbance power
  • CISPR 16-1-4: Ancillary equipment – Radiated disturbances
  • CISPR 16-2: Specification for radio disturbance and immunity
  • CISPR 22: Information technology equipment
  • CISPR 24: Immunity Testing of ITE
  • CISPR 25: Vehicles, boats and internal combustion engines
  • CISPR 32: Electromagnetic compatibility of multimedia equipment
  • IEC Standards
  • IEC 61000-4-39:2017: Electromagnetic Compatibility Immunity Requirements
  • IEC 60050-444 International Electrotechnical Vocabulary Part 444: Elementary Relays
  • IEC 60255: Electrical Relays
  • IEC 60270: Partial Discharge Measurements
  • IEC 60533: EMC Testing of Ships with Metallic Hulls
  • IEC 60601-1-2: Medical Electrical Equipment - Collateral standard: Electromagnetic compatibility - R
  • IEC 61000-3-2: Limits - Limits for Harmonic Current Emissions (equipment input current up to and inc
  • IEC 61000-3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public lo
  • IEC 61000-3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public l
  • IEC 61000-3-12: Limits for harmonic currents produced by equipment connected to public low-voltage s
  • IEC 61000-3-13: Electromagnetic compatibility (EMC) Limits - Assessment of emission limits for the c
  • IEC 61000-4-2: Electrostatic Discharge Immunity Test
  • IEC 61000-4-3: Radiated, radio-frequency, electromagnetic field immunity test
  • IEC 61000-4-31: Testing and measurement techniques - AC mains ports broadband conducted disturbance
  • IEC 61000-4-4: Electrical Fast Transient (EFT) / EMC Burst Immunity Test Standard
  • IEC 61000-4-5: Testing and Measurement techniques - Surge Immunity Test
  • IEC 61000-4-6: Immunity to Conducted Disturbances, Induced by Radio Frequency Fields
  • IEC 61000-4-7: General Guide on Harmonics and Interharmonics Measurements and Instrumentation
  • IEC 61000-4-8 Electromagnetic Compatibility (EMC) - Part 4-8: Testing and Measurement Techniques - P
  • IEC 61000-4-9 Electromagnetic Compatibility (EMC) - Part 4-9: Testing and Measurement Techniques - P
  • IEC 61000-4-10: Testing and Measurement Techniques Damped Oscillatory Magnetic Field Immunity Test
  • IEC 61000-4-11: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage V
  • IEC 61000-4-12: Testing and measurement techniques - Ring wave immunity test
  • IEC 61000-4-13: Testing and measurement techniques - Harmonics and interharmonics including mains si
  • IEC 61000-4-14: Testing and measurement techniques - Voltage fluctuation immunity test
  • IEC 61000-4-15: Testing and Measurement Techniques - Flickermeter. Functional and Design Specificati
  • IEC 61000-4-16: Testing and Measurement Techniques – Test for Immunity to Conducted, Common Mode Dis
  • IEC 61000-4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test
  • IEC 61000-4-18: Testing and measurement techniques – Damped oscillatory wave immunity test
  • IEC 61000-4-19: Test for Immunity to Conducted, Differential Mode Disturbances and Signaling
  • IEC 61000-4-20 Electromagnetic compatibility (EMC) – Part 4-20: Testing and measurement techniques –
  • IEC 61000-4-21 Electromagnetic compatibility (EMC) Part 4-21: Testing and measurement techniques Rev
  • IEC 61000-4-27: Unbalance, immunity test
  • IEC 61000-4-28: Testing and measurement techniques - Variation of power frequency, immunity test
  • IEC 61000-4-29 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques -
  • IEC 61000-4-30: Testing and Measurement Techniques - Power Quality Measurement Methods.
  • IEC 61000-4-34: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage V
  • IEC 61000-6-2: Immunity Testing of Industrial Equipment
  • IEC 61000-6-4: Emission standard for industrial environments
  • IEC 61000-6-5: Immunity for Power Station and Substation Environments
  • IEC 61010-1: Safety of Measuring, Control and Laboratory Equipment
  • IEC 61326: EMC Testing of Laboratory Equipment
  • IEC 61340-3-1: Methods for Replication of Electrostatic Effects - Human Body Model (HBM) Electrostat
  • IEC 61340-3-2: Methods for Replication of Electrostatic Effects – Machine Model (MM) Electrostatic D
  • IEC 61672-1: Electroacoustics – Sound level meters – Part 1: Specifications
  • IEC 61672-2: Electroacoustics – Sound level meters – Part 2: Pattern evaluation tests
  • IEC 61672-3: Electroacoustics – Sound level meters – Part 3: Periodic tests
  • IEC 61850: Communication Networks and Systems in Substations
  • IEC 62037: Passive RF and Microwave Devices, Intermodulation Level Measurement
  • IEC 62233: Electromagnetic Fields of Household Appliances and Similar Apparatus with Regard to Human
  • ISO Standards
  • ISO 10605: Road Vehicles—Test Methods for Electrical Disturbances from Electrostatic Discharge
  • ISO 11452: Immunity Testing of Road Vehicle Components
  • ISO 11801:2002 - Information technology – Generic cabling for customer premises
  • ISO 13766-1: 2018 Earth-Moving and Building Construction Machinery
  • ISO 14117: EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrill
  • ISO 14644 Series: Cleanroom Standards
  • ISO 16750-2: Road Vehicles: Environmental Conditions and Testing for Electrical and Electronic Equip
  • ISO 14982: Agricultural and Forestry Machinery
  • ISO 21501-4: Light Scattering Airborne Particle Counter for Clean Spaces
  • ISO 7196:1995 Acoustics — Frequency-weighting characteristic for infrasound measurements
  • ISO 7637: Road Vehicles – Electrical Disturbances from Conduction and Coupling
  • ISO 7637-2: Electrical Transient Conduction Along Supply Lines Only
  • Health Canada Standards
  • Canada Safety Code 6: Radiofrequency Exposure Guidelines, 3 kHz – 300 GHz
  • ISO/IEC 17025:2017 Accreditation
  • ISTA Standards
  • ISTA 7 Series: Development Tests
  • ITU-T Standards
  • ITU-T K Series: Protection Against Interference
  • ITU-T Y.1564
  • JASO Standards
  • JASO D001-94: Environmental Testing Methods for Automotive Electronic Equipment
  • LV Standards
  • LV 123
  • LV 124 Electric and Electronic Components in Motor Vehicles up to 3.5t
  • LV 148: Electric and Electronic components for vehicles
  • Mercedes-Benz Standards
  • Mercedes-Benz MBN 10284-2
  • NEBS Standards (Network Equipment Building System)
  • Telecordia GR-1089 Core: Electromagnetic Compatibility and Electrical Safety - Generic Criteria for
  • NERC/FERC Standards
  • Standard PRC-005-1.1b: Transmission and Generation Protection System Maintenance and Testing
  • Standard PRC-005-2 Protection System Maintenance Schedule
  • JEDEC Standards
  • JEDEC JESD22-A110: Highly – Accelerated Temperature and Humidity Stress Test (HAST)
  • MIL Standards
  • MIL-STD-1275: Characteristics of 28 Volt DC Input Power to Military Vehicles
  • MIL-STD-1399-300: Interface Standard for Shipboard Systems
  • MIL-STD-1553: Aircraft Internal Time Division Command/Response Multiplex Data Bus
  • MIL-STD-1576: Electroexplosive Subsystem Safety Requirements and Test Methods For Space Systems
  • MIL-STD-188-125-2: HEMP Protection for Ground-Based C41 Facilities Performing Critical Missions, Par
  • MIL-STD-461
  • MIL-STD-461F: Electromagnetic Interference Characteristics of Equipment
  • MIL-STD-461G: Electromagnetic Interference Characteristics of Equipment
  • MIL-STD-461G CS101: Conducted Susceptibility, Power Leads
  • MIL-STD-461G CS103: Conducted Susceptibility, Antenna Port, Intermodulation
  • MIL-STD-461G CS104: Conducted Susceptibility, Antenna Port, Rejection of Undesired Signals
  • MIL-STD-461G CS105: Conducted Susceptibility, Antenna Port, Cross-Modulation
  • MIL-STD-461G CS106: Conducted Susceptibility, Transients, Power Leads
  • MIL-STD-461G CS109: Conducted Susceptibility, Structure Current
  • MIL-STD-461G CS114: Conducted Susceptibility, Bulk Cable Injection
  • MIL-STD-461G CS115: Conducted Susceptibility, Bulk Cable Injection, Impulse Excitation
  • MIL-STD-461G CS116: Conducted Susceptibility, Damped Sinusoidal Transients, Cables and Power Leads,
  • MIL-STD-461G CS117: Conducted Susceptibility, Lightning Induced Transients, Cables and Power Leads
  • MIL-STD-461G CS118: Personnel Borne Electrostatic Discharge (ESD)
  • MIL-STD-461G CE101, CE102: Conducted Emissions, Audio Frequency Currents and Radio Frequency Potenti
  • MIL-STD-461G CE106: Conducted Emissions, Antenna Port
  • MIL-STD-461G RE101: Radiated Emissions, Magnetic Field
  • MIL-STD-461G RE102: Radiated Emissions, Electric Field
  • MIL-STD-461G RE103: Radiated Emissions, Antenna Outputs
  • MIL-STD-461G RS101: Radiated Susceptibility, Magnetic Field
  • MIL-STD-461G RS103: Radiated Susceptibility, Electric Field
  • MIL-STD-461G RS105: Radiated Susceptibility, Transient Electromagnetic Field, or EMP (Electromagneti
  • MIL-STD-464: RF Environmental Effects on Systems
  • MIL-STD-704: Aircraft Electric Power Characteristics
  • MIL-STD-750: Test Methods for Semiconductor Devices
  • MIL-STD-810G: Test Method Standard for Environmental Engineering Considerations and Laboratory Tests
  • MIL-STD-883: Test Method Standard, Microcircuits
  • Peugeot Standards
  • Peugeot PSA B21 7110
  • Renault Standards
  • Renault 36-00-808
  • RTCA/DO-160 Standards
  • RTCA/DO-160 Section 5: Temperature Variation Testing
  • RTCA/DO-160 Section 6: Humidity Testing
  • RTCA/DO-160 Section 8: Vibration Testing
  • RTCA/DO-160 Section 10: Waterproofness Testing
  • RTCA/DO-160 Section 15: Magnetic Effect
  • RTCA/DO-160 Section 16: Power Input
  • RTCA/DO-160 Section 17: Voltage Spike
  • RTCA/DO-160 Section 18: Audio Frequency Conducted Susceptibility – Power Inputs
  • RTCA/DO-160 Section 19: Induced Signal Susceptibility
  • RTCA/DO-160 Section 20: Radio Frequency Susceptibility (Conducted/Radiated)
  • RTCA/DO-160 Section 21: Emission of Radio Frequency Energy
  • RTCA/DO-160 Section 22: Lightning Induced Transient Susceptibility
  • RTCA/DO-160 Section 23: Lightning Direct Effects
  • RTCA/DO-160 Section 25: Electrostatic Discharge (ESD)
  • SAE Standards
  • SAE J1113: Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicle
  • SAE J551: Measurement of Magnetic and Electric Strength
  • TIA-EIA Standards
  • TIA/EIA-568-B: Commercial Building Telecommunications Cabling Standard
  • UL Standards
  • UL 1414 Section 16: Impulse Voltage Test
  • UL 1449: Surge Protective Devices (SPD)
  • UL 1703: Flat-Plate Photovoltaic Modules and Panels
  • UL 1741: Inverter testing, Converters, Controllers and Interconnection System Equipment for Use With
  • UL 508A: Industrial Control Panels
  • UL 60950: Safety of Information Technology Equipment
  • UL 6500: Audio/Video and Musical Instrument Apparatus for Household, Commercial, and Similar General
  • UL 864: Control Units and Accessories for Fire Alarm Systems
  • UL 943: Ground-Fault Circuit-Interrupters
  • Military Guidelines
  • MIL-HDBK-5400 Paragraph 4.6.2.6: Shock
  • IEEE Standards
  • IEEE 519-2014: Recommended Practice & Requirements for Harmonic Control