SAE J551 specifies measurement procedures and performance levels for magnetic and electric field emissions and conducted power mains emissions over the frequency range of 150 kHz to 30 MHz for vehicles incorporating electric propulsion systems, e.g., battery, hybrid, or plug-in hybrid electric vehicles.
Conducted emissions measurements for SAE J551 apply only to battery-charging systems which utilize a switching frequency above 9 kHz, are mounted on the vehicle, and whose power is transferred by metallic conductors. Conducted emission requirements apply only during charging the batteries from AC power lines. Conducted and radiated emissions measurements of battery-charging systems that use an induction power coupling device are not covered by the SAE J551 document. The measurement of electromagnetic disturbances for frequencies from 30 MHz to 100 MHz is covered in CISPR 12.
Products Used in Testing:
Rohde & Schwarz
Rohde & Schwarz ESW44 | 1 Hz – 44 GHz
The Rohde & Schwarz ESW44 EMI Receiver excels in precision and range, covering a frequency spectrum from 1 Hz to 44 GHz, with a dynamic measurement bandwidth up to 80 MHz. The receiver comes equipped with 21 preselection...
Teseq
Teseq NSG 3150 Combination Wave Surge Generator | 15 kV
The Teseq NSG 3150 is a surge generator solution for IEC/EN 61000-4-5 standards. Particularly suited for outdoor use, this model is essential for evaluating various systems such as lighting, communications, and energy...
Teseq
Teseq NSG 438 ESD Gun | 30 kV
The Teseq NSG 438 30 kV ESD Gun fulfills the requirements of all known ESD standards. The basic model is type approved and calibrated in conformity with IEC 61000-4-2. By adding appropriate network modules, other standards can...