Advantest R3961T S-Parameter Test Set, 300 kHz - 3.6 GHz

Advantest R3961T 3 Port Test Set
Enlarge Image
Request Quote Print Page

The Advantest R3961T 3 Port Test Set is a test set designed to be connected to the R3762AH Network Analyer to measure transmission and reflection characteristics. It contains three ports, and the forward and reverse transmission as well as ref1ection characteristics can be measured without having to remove the device from the test port. The measurements are made using the R3762AH Network Analyzers basic controller functions.



Frequency Range 300 kHz to 3.6 GHz
Test Port Impedance 50 ohms
Directivity ≥25 dB, 300 kHz to 5 MHz ≥12 dB, 1.3 GHz to 3 GHz ≥30 dB, 1.3 GHz to 3.6 GHz
Input Port Return Loss ≥17 dB, 300 kHz to 1.3 GHz ≥35 dB, 5 MHz to 1.3 GHz ≥10 dB, 3 GHz to 3.6 GHz
Test Port Return Loss ≥20 dB, 300 kHz to 1.3 GHz ≥16 dB, 1.3 GHz to 3 GHz ≥14 dB, 3 GHz to 3.6 GHz
Error Correction Functions Normalize 1-port Calibration 2-port Calibration Data Averaging Auto Offset Compensation
Instrument State Functions Save: Instrument settings are stored in an internal register by pressing the Save Register key. Measurement data, calibration data, and instrument settings are saved on built-in floppy disk by pressing the Store key Recall Limit Line Function
Programming Functions BASIC Controller Function Built-in Arithmetic Functions Floppy Disk Drive Functions
Conncetion With External Equipment Copy: Graphs displayed on the CRT and data lists can be output to a GPIB compatible plotter or printer without requiring an external controller Video Plotter Output Signals: Separate signal (DIN 8-pin), Composite signal (BNC) GPIB Data Output and Remote Control: Based on IEEE 488 S-parameter Test Set Control Parallel I/O Output: TTL level, 8-Bit output (2 ports), 4-Bit input / output (2 ports) RS-232-C: Serial output based on RS-232-C standard External Trigger: BNC female connector, TTL level, LOW enable External Reference Frequency Input: Frequency 1, 2, 5, 10 MHz. Connector: BNC female connector