Advantest U4941N Portable Spectrum Analyzer, 9 kHz - 2.2 GHz

Advantest U4941N Portable Spectrum Analyzer
Enlarge Image
Advantest U4941N
Request Quote Print Page
Datasheet Specifications

The Advantest U4941N introduces portability and convenience to RF measurements. The 5.8 x 11.5 x 13 inch, 14.3 pound package is easily carried to hard-to-reach places. And if your measurement site lacks AC mains, the U4941N is ready to run directly from an external 12 VDC supply or from its own optional attach-on battery.


This analyzer features a mechanical package that is designed to MIL-T-28800D environmental standards for shock, vibration, and drop - adding to your confidence to carry the U4941N into the field.

 

Features:

  • Operate from Attach-on Optional Battery, Standard AC Adapter, or Direct 12-V DC
  • 6-inch Color TFT LCD display
  • Built-in Counter
  • 90 dB display dynamic range
  • EMI Measurement with built-in Quasi-peak detector and EMC filters
  • 5.8 x 11.5 x 13 inch; 14.3 lbs

 

Additional Capabilities:

  • AM/FM detector and built-in speaker/headphone jack for signal demodulation
  • Faster measurements using built-in routines for: Occupied bandwidth; Adjacent channel leakage; Noise power; 2nd and 3rd order distortion; Percent AM
  • 10 MHz external reference input for additional frequency accuracy
  • RF Input: Connector type: N type. Impedance: 75 ohms nominal
  • 10 MHz Reference Input: BNC female
  • Video Output: BNC female
  • External Trigger Input: BNC female
  • Gate Input: BNC female
  • Phone Output: Subminiature monophonic jack
  • GPIB Interface: IEEE-488 bus connector
  • Plotter: R9833, HP7470A, HP 7475A, HP7440A, HP7550A, HP2225A
  • RS-232C: D-SUB 9-pin
  • External Memory Card: slots: 2. Connector: JEIDA-Ver. 4.1/PCMCIA Rel. 2.0
  • Power Requirements:
    • AC input (use AC/DC adaptor A08180): 90 to 120 V; 220 to 240V
    • External DC input:
    • Voltage range: +10 to +15 V, Power
    • Consumption: 50 W maximum