Anritsu MS8604A Digital Mobile Radio Transmitter Tester

Anritsu MS8604A Digital Mobile Radio Transmitter Tester - Advanced Test Equipment Rentals
Enlarge Image
Anritsu MS8604A
Request Quote Print Page
Datasheet Other1
 

Features:

  • Major transmitter functions evaluated by a single system
  • Compatible with NADC, PDC, PHS, Digital MCA, GSM, DCS1800 (PCN), CT2, DECT, WCPE, PACS, RCR STD-39 TETRA systems, and GMSK and pi/4 DQPSK universal measurement (measurement software can be installed as an option)
  • High-speed measurement (under 1 second for modulation-accuracy measurements)
  • Input up to 10W (internal 20dB attenuator and power meter for high power levels)

 

Measurement Example:
  • Quick configuration for different communication systems
  • One-touch selection of measurement items
  • Direct measurement with broadband power sensor
  • Internal calibration signal
  • High-power measurements
  • Measurement of antenna power and leakage power during carrier-off

 

Specifications:

  • Frequency Range: 100Hz to 8.5GHz
  • Max. input level: +40 dBm (10 W)

Spectrum Analyzer:
  • Frequency:
    • Setting Range: 100Hz to 8.5GHz (resolution: 1Hz), 0 to 2 GHz (freq. band: 0), 1.7 to 7.5GHz (freq. band: 1-), 6.5 to 8.5 GHz (freq. band: 1+)
    • Preselector range: 1.7 to 8.5 GHz (bands: 1-/1+)
    • Span: Setting range: 0 Hz, 100 Hz to 8.5 GHz
    • RBW: Setting range: 10 Hz to 3 MHz (3 dB), 1-3 sequence
  • Amplitude:
    • Level measuring range: Average noise level to +40 dBm.  Average noise level: ≤ -112 dBm
    • Reference Level: Setting range: -80 to +40 dBm; Input attenuator: Setting range: 20 to 75 dB in 5 dB steps
    • Detection mode: POS PEAK, SAMPLE, NEG PEAK
    • AM/FM demodulation: Demodulated waveform display and monitoring demodulated audio signal with internal speaker

Power Meter:
  • Frequency Range: 100 kHz to 5.5 GHz
  • Level Range: -20 to +20 dBm
  • Applicable power sensor: MA4601A


Other features:

  • External Memory: one slot
  • Direct plotting: can hard-copy screen via GPIB 2
  • External Control:
    GPIB 1 - As device controlled by host
    GPIB 2 - Controls other instruments as controller
Application Software
The application software extends the analysis function of the MS8604A by using PTA (Personal Test Automation) functions.


Anritsu MS8604A Options:

Application System Measurement Software
PDC Option 11
PHS Option 12
NADC Option 13
Digital MCA Option 14
GSM Option 15
DCS1800 (PCN)
DECT
CT2
General-purpose GMSK
WCPE Option 16
RCR STD-39
PACS
TETRA
General-purpose pi/4 DQPSK