Anritsu MT8801C Radio Communication Analyzer

Need Help? Call (800) 404-2832ATEC AssuranceWorldwide Delivery
Rent Anritsu MT8801C Radio Communication Analyzer
Enlarge Image
Anritsu MT8801C
Request Quote Print Page
MT8801C Datasheet
Every major radio communication system in the world, including GSM/DCS1800/PCS1900, CDMA, IS-136A, PDC, PHS and DECT, can be evaluated using just one MT8801C Radio Communication Analyzer, covering the 300 kHz to 3 GHz frequency band in one hardware platform, and the dedicated measurement software options. The call processing test and sensitivity test using loop-back method are possible for GSM/DCS1800/PCS1900, CDMA, IS-136A and DECT.

In addition, connection testing, as well as send testing while communicating, are also possible for PDC and PHS measurement by using the call processing function, and the PDC uplink RCH can be monitored (RSSI, estimated error rate) too. FM radio transmission/reception tests are simplified by using the optional analog measurement function, and the optional spectrum analyzer function covering 10 MHz to 3 GHz is very useful for maintaining as well as measuring spurious near carrier on production lines. GPIB and RS-232C interfaces are standard, so MT8801C can be incorporated easily into automated production lines or on-site automated testing systems.
Anritsu MT8801C Features
  • 1 tester for multiple formats: IS-95, CDMA2000 1X, AMPS, GSM/GPRS, IS-136, PDC, and PHS
  • Optional internal Spectrum Analyzer
  • Built-in Thermal Power Meter, standard
  • External Control Software option for multiple formats
  • Wireless Internet Protocol option for development of CDMA2000 1X wireless Internet devices and applications
Anritsu MT8801C Specs
Frequency range 300 kHz to 3 GHz
Maximum input level +40 dBm (10 W, MAIN connector), +20 dBm (100 mW, AUX connector)
Input/output connector MAIN I/O connector  
Impedance: 50 ½, N-type
VSWR: ≤1.2 (≤2.2 GHz), ≤1.3 (>2.2 GHz)
AUX input/output connector: TNC-type
Reference oscillator Frequency: 10 MHz
Starting characteristics: ≤ 5 5 10-8/day (after 10 minutes of warm-up, referred to frequency after 24 hours warm-up)
Aging rate: ≤ 2 5 10-8/day, ≤ 1 5 10–7/year (referred to frequency after 24 hours warm-up)
Temperature characteristics: ≤ 5 5 10–8 (0° to 50°C, referred to frequency at 25°C)
External standard input: 10 MHz or 13 MHz (±1 ppm), input level: 2 to 5 Vp-p
Power meter Frequency range: 300 kHz to 3 GHz
Level range: 0 to +40 dBm, –10 to +40 dBm (CDMA measurement)
Level accuracy: ±10% (0 to +40 dBm, after zero-point calibration), ±10% (–10 to +40 dBm, 18° to 28°C, at average value, after zero-point calibration)
Signal generator Frequency Range: 300 kHz to 3 GHz
Resolution: 1 Hz
Accuracy: Reference frequency accuracy ±100 mHz
Output level Level range (no modulation or analog modulation): –13 to –133 dBm (Main), +7 to –133 dBm (AUX)
Level accuracy: ±1 dB (10 MHz to 2.2 GHz, ≥–123 dBm, 18° to 28°C), ±3 dB (10 MHz to 2.2 GHz, ≥–133 dBm),
±2 dB (>2.2 GHz, ≥–123 dBm, 18° to 28°C), ±4 dB (>2.2 GHz, level: ≥–133 dBm)
Radiated interference: 1 μV/50 Ω (carrier frequency measured, 25 mm from front panel with two-turn 25 mm diameter loop antenna)
Signal purity Spurious: ≤–50 dBc (at CW, offset frequency 100 kHz to ≤50 MHz; where carrier frequency: other than 1300 to 1400 MHz and 2000 to 2100 MHz), ≤–40 dBc (for all band)
Harmonics: ≤–25 dBc (at CW)