Anritsu S362E Site Master Cable & Antenna Analyzer

Anritsu S362E Site Master Cable & Antenna Analyzer
Enlarge Image
Anritsu Site Master S362E
Request Quote Print Page
Manual Site Master S362E Datasheet Brochure Supplemental Document Additional Information
The Anritsu S362E Site Master Cable & Antenna Analyzer is a cable sweeper device essential for conducting Cable Loss and Insertion Loss testing, as well as VSWR testing and Return Loss testing. This device operates at a frequency range of 100kHz to 6 GHz as a spectrum analyzer and a range of 2 MHz to 6 GHz as a configurable cable and antenna analyzer. Anritsu S362E are multi-functional test instruments, featuring 2-port transmission measurement, a 32V bias tee and high-accuracy power meter and interference analysis.

S362E models, as well as being versatile in functionality, feature an accessible interface. A bright and broad 8.4 inch full-color display is clearly visible in daylight and complimented by an accessible interface with the capacity to generate spectrogram displays and GPS time and location stamping. Signals as low as -152 dBm and a phase noise of over -100dBc/Hz can be detected by Anritsu S362E devices. These analysis devices are essential tools for companies and organizations seeking to improve their communications systems to meet ever-evolving 3G and 4G Network demands.
 
Anritsu Site Master S362E Features
  • Cable & Antenna Analyzer: 2 MHz to 6 GHz
  • Spectrum Analyzer: Spectrum Analyzer
  • Return loss, VSWR, cable loss, DTF
  • 2-port transmission measurements with 32V bias tee
  • 1-port phase, Smith chart
  • Optical DTF measurements
  • PIM 3 rd, 5th and 7th Order Frequency measurements
  • Dual display mode capabilities
  • Built-in, editable signal standard and cable standard lists
  • Trace overlay and trace math to monitor changes with - Reference traces
  • Marker table with automatic peak/valley markers
  • GPS tagging
  • Limit lines and alarming for providing reference standards
  • GPS tagging of data to verify location of tests
  • Master Software Tools for post-analysis and report generation
Anritsu Site Master S362E Specs
Spectral Purity
SSB Phase Noise @ 1 GHz –100 dBc/Hz, –110 dBc/Hz typical @ 10 kHz offset
–105 dBc/Hz, –112 dBc/Hz typical @ 100 kHz offset
–115 dBc/Hz, –121 dBc/Hz typical @ 1 MHz offset
Amplitude Ranges
Dynamic Range > 95 dB (2.4 GHz), 2/3 (TOI-DANL) in 10 Hz RBW
Measurement Range DANL to +26 dBm
Display Range 1 to 15 dB/div in 1 dB steps, ten divisions displayed
Reference Level Range –120 dBm to +30 dBm
Attenuator Range 0 to 55 dB, 5.0 dB steps
Maximum Continuous Input +35 dBm
Amplitude Units Log Scale Modes: dBm, dBV, dBmv, dBμV
Linear Scale Modes: nV, μV, mV, V, kV, nW, μW, mW, W, kW
Amplitude Accuracy
100 kHz to 4.0 GHz ± 1.25 dB, ± 0.5 dB typical
> 4.0 GHz to 6 GHz ± 1.50 dB, ± 0.5 dB typical
  • S362E-0010 - Variable Voltage Bias Tee
  • S362E-0021 - 2-port Transmission Measurement
  • S362E-0031 - GPS Built-in Receiver (Requires Antenna P/N 2000-1528-R, sold separately)
  • S362E-0019 - High Accuracy Power Meter (Requires USB Power Sensor)
  • S362E-0029 - Power Meter
  • S362E-0025 - Interference Analyzer
  • S362E-0027 - Channel Scanner
  • S362E-0431 - Coverage Mapping (requires Option 0031)
  • S362E-0444 - EMF Measurement System
  • S362E-0028 - CW Signal Generator (Requires CW Signal Generator Kit, P/N 69793)
  • S362E-0090 - Gated Sweep
  • S362E-0509 - AM/FM/PM Analyzer with Coverage Mapping (Options 31 and 431 are required for utilization of coverage mapping feature)
  • S362E-0752 - CPRI LTE RF Software (Requires option 759) 
  • S362E-0753 - OBSAI LTE RF Software (Requires option 759)
  • S362E-0759 - RF Over Fiber Hardware (Must be ordered with option 752 or 753)
  • S362E-0413 - Ethernet Connectivity
  • S362E-0098 - Standard Calibration to Z540
  • S362E-0099 - Premium Calibration to Z540 plus test data
Anritsu Site Master S362E Standards
  • AT&T
  • CPRI/OBSAI
  • Sprint
  • Sweep Testing
  • T-Mobile
  • Verizon