FW Bell 8010 Single Channel Gauss/Tesla Meter

Tech Support
(800) 404-2832

With Every
Rental

Worldwide
Delivery

The FW Bell 8010 Single Channel Gauss/Tesla Meter has been replaced by the FW Bell 8030 Three Channel Gauss/Tesla Meter.

View the FW Bell 8030 Three Channel Gauss/Tesla Meter

The FW Bell 8010 Single Channel Gauss/Tesla Meter leads the way for advanced Hall Effect magnetic measuring technology. The easy-to-use front panel programming feature incorporates the latest in user control operations. And the 8010 is capable of measuring and displaying seven different parameters, including flux density, frequency, temperature, min, max, peak and valley.

This high accuracy instrument is fully equipped to meet most magnetic measuring applications. Bell's dynamic probe correcting software increases the 8010 measurement capabilities to make it the most versatile magnetic measuring tool in the world.

Specifications
Features
Applications
Options
Accessories
Standards
Videos

Features

TFT Color LCD Display with Back-lighting
WVGA, 600 x 480 pixels
Over 40 standard probes available
Automatic probe coefficient correction
Displays in Gauss, Tesla, amp/meter or Oe
Relative mode
Fully menu-driven for easy operation
Auto zero and auto calibration
IEEE-488, RS-232, Ethernet RJ-45 and USB interface
CE-compliant
Manufactured to IS0 9000 standards

Specifications

Ranges *Low field probe † High field probe	300mG (30μT)* 3kG(300mT) 3G (300μT)* 30kG (3T) 30G (3mT) 300kG(30T)† 300G (3OmT)
Resolution	1 μG (0.1nT) to 1G (0.1mT) {Dependent on Probe Type Used}
Accuracy (Displayed reading)	DC basic AC basic	±0.05% of reading ±2% of reading
Frequency range	DC mode AC mode	dc to 250Hz 20Hz to 50kHz
Accuracy (Corrected analog output)	DC basic AC basic Frequency range	±0.1% of range ±2% of range dc to 500Hz
Frequency range (Uncorrected analog output)	DC mode AC mode	dc to 100Hz 10Hz to 50kHz
Analog output	Output voltage Source impedance Connector	±3V FS. or ±10V F.S. or adjustable from 0.1 – 9.9V <100 ohms Standard female BNC
Additional influences	Temperature coefficient	±(0.02% of reading ±1 count)/°C
Temperature range	Operating Storage	0°C to +50°C -20°C to +60°C
Front panel display	WVGA, 600 x 480 pixels, TFT Color LCD Display with Backlighting. (6.5" diagonal viewing area)
Communication ports	RS-232 Baud rate IEEE-488 Protocol Protocol Ethernet USB	Standard 9-pin female "D" connector 300,1200,2400,4800,9600,19200,38400, 57600,115200 bits/sec Standard 24-pin GPIB connector Protocol IEEE-1987.2 and SCPI-1999 IEEE-802.3u Data Link Layer & TCP/IP Transport & Network Layer Standard RJ-45 connector Version 1.1 full speed
Power	Volts: 100/120 or 220/240 Frequency: 50-60 Hz or 50-60 Hz Current: 1.O A (max) or 0.5 A (max)