Fluke 7103 Micro-Bath Thermometer Calibrator

Rent Fluke 7103 Micro-Bath Thermometer Calibrator
Enlarge Image
Fluke Calibration 7103
Request Quote Print Page
Datasheet
Micro-Baths can be used anywhere for any type of sensor. The Model 7103 weighs 9.8 kg with the fluid. It’s lighter and smaller than most dry-wells and has a spill-proof lid. Micro-Baths can even be transported with fluid in them. Display accuracy to ±0.25 °C for quick calibrations without a reference thermometer. With a 4.8 cm diameter, 14 cm deep tank, a Micro-Bath can calibrate any type of sensor including short, square, or odd-shaped sensors. The problems of fit and immersion are virtually eliminated by using a fluid medium rather than a dry-block calibrator. Fluke Micro-Baths are perfect for liquid-in-glass and bimetal thermometers. All Micro-Baths have RS-232 ports and come with Interface-it software. Also included are contacts to Calibrate a thermal switch, eight set-point memory storage, ramp-rate adjust and over-temperature safety cutout.
 

Fluke 7103 Specifications:

 
Range: 35 °C to 200 °C (95 °F to 392 °F)
Accuracy: ± 0.25 °C
Stability: ± 0.02 °C at 100 °C (oil 5013)
± 0.03 °C at 200 °C (oil 5013) 
Uniformity: ± 0.02 °C
Resolution: 0.01 °C/°F
Operating Temperature: 5 °C to 45 °C
Heating Time: 25 °C to 200 °C: 40 minutes
Cooling Time: 200 °C to 100 °C: 35 minutes
Well Size: 64 mm dia. x 140 mm deep (2.5 x 5.5 in) (working area is 48 mm [1.9 in] in diameter) 
Size (WxHxD): 14 x 26 x 20 cm
(5.5 x 10.38 x 8 in) 
Weight: 4.5 kg (10 lb) with fluid
Volume: 0.75 L (1.6 pints)
Power: 115 V ac (± 10 %), 2.3 A or 230 V ac (± 10 %), 1.1 A, switchable, 50/60 Hz, 270 W 
Computer Interface: RS-232 included with free Interface-it software
NIST-Traceable Calibration: Data at 50 °C, 100 °C, 150 °C, and 200 °C