Number of analog input channels |
20 ch, Expandable up to 200 ch by unit of 20 ch |
External input output |
Input *1 |
Trigger or Sampling input 1ch, Logic or Pulse input 4 ch |
Output *1 |
Alarm output 4 ch |
Sampling interval |
10 ms to 1 h (in 10 ms to 50 ms, voltage only and limited channel), External |
Time scale |
1 sec to 24 hour/division |
Trigger function |
Action |
Start or stop capturing data by the trigger |
Source |
Start: Off, Input signal, Alarm, External *1, Clock, Week or Time |
Stop: Off, Input signal, Alarm, External *1, Clock, Week or Time |
Combination |
OR or AND condition at the level of signal or edge of signal |
Condition |
Analog: Rising, Falling, Window-in, Window-out |
Pulse: Rising, Falling, Window-in, Window-out |
Logic: Rising, Falling |
Alarm function |
Detecting method |
Level or edge of signal |
Condition |
Analog: Rising, Falling, Window-in, Window-out |
Pulse: Rising, Falling, Window-in, Window-out |
Logic: Rising, Falling |
Alarm output *1 |
4 channels, Output type: Open collector (pulled-up to 5 V by resistor 10 kΩ) |
Pulse input function *1 |
Accumulating count mode |
Accumulating the number of pulses from the start of measurement
Range: 50, 500, 5k, 50k, 500k, 5M, 50M, 500M counts/F.S. |
Instant count mode |
Counting the number of pulses per sampling interval
Range: 50, 500, 5k, 50k, 500k, 5M, 50M, 500M counts/F.S. |
Rotation count (RPM) mode |
Counting the number of pulses per second and then it is converted to RPM
Range: 50, 500, 5k, 50k, 500k, 5M, 50M, 500M rpm /F.S. |
Max. input pulse rate |
50k pulses/sec or 50k counts per sampling interval (16 bits counter is used) |
Calculation function |
Between channels |
Addition, Subtraction, Multiplication and Division for analog input |
Statistical |
Select two calculations from Average, Peak, Max., Min., RMS |
Search function |
Search for analog signal levels, values of logic or pulse or alarm point in captured data |
Interface to PC |
Ethernet (10 BASE-T/100 BASE-TX), USB (Full speed) |
Storage device |
Built-in Flash memory (2 GB), USB memory device *2 |
Data saving function |
Captured data |
Direct saving of data into built-in Flash memory or USB memory device |
Others |
Setting conditions, Screen copy |
Ring capturing mode |
Function: ON/OFF, Number of capturing point: 1000 to 2000000 (size of the capture data will be limited to 1/3 of available memory when in Ring Mode) |
USB memory device emulation |
USB Memory emulation mode (Transfer or delete the file in built-in memory) |
Engineering scale function |
Set based on the reference point of the scaled output and input signal for each channel (Voltage measurement: four points are necessary to scale the output, Temperature measurement: two points are necessary to scale the output). |
Display |
Size |
5.7 inch TFT color LCD (VGA: 640 x 480 dots) |
Formats |
Waveform + Digital, Waveform only, Calculation + Digital, Expanded digital |
Operating environment |
0 °C to 45°C, 5 % to 85 % RH
(When operating with battery pack 0 °C to 40 °C, charging battery 15 °C to 35°C) |
Power source |
AC adapter (100 V to 240 V, 50/60 Hz)
DC power (8.5 V to 24 V DC, max. 26.4 V)*3, Battery pack*3 |
Power consumption |
32VA or lower
(When operating with AC adapter, displaying LCD, charging battery pack) |
External dimensions (WxDxH) |
approx. 232 x 152 x 50 mm |
Weight |
approx. 900 g (Excluding AC adapter and battery pack) |