IFI GT825-500 High Power Pulse TWT Amplifier 2.5 - 8 GHz, 500 Watt

Need Help? Call (800) 404-2832ATEC AssuranceWorldwide Delivery
Rent IFI GT825-500 High Power PulseTWT Amplifier 2.5 GHz - 8 GHz, 500 Watt
Enlarge Image
Rent IFI GT825-500 High Power PulseTWT Amplifier 2.5 GHz - 8 GHz, 500 Watt Rent IFI GT825-500 High Power PulseTWT Amplifier 2.5 GHz - 8 GHz, 500 Watt
Instruments for Industry (IFI) GT825-500
Request Quote Print Page
GT825-500 Datasheet

The IFI GT-500 Series include a full complement of RF and hardware protection systems including high VSWR, over-current and voltage protection as well as redundant thermal and airflow sensors to prevent the TWT from overheating.

It features modular construction and this concept of modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.
Instruments for Industry (IFI) GT825-500 Features
  • Instantaneous Broadband Frequency Range
  • Modular Design Construction
  • Rugged Construction & High Reliability
  • Backlit LCD Display
  • Integrated Force Air Cooling
  • Self-diagnostic circuitry
  • IEEE-488 interface, RS232
  • Solid State Power Supply
Instruments for Industry (IFI) GT825-500 Specs
Min Pwr Out 500 Watts
Min Sat Gain 57 dB
Input/output Impedance: 50 ohms
RF Input/ Sample Connectors: Type N Female, unless specified otherwise
RF Output Connector: Type SC or 716 Female up to 8 GHz, 8-12 GHz is WR90, 12-18 GHz is WR62, 7.5-18 GHz is WRD750, 6.5-18 GHz is WRD650. Other waveguides available by request or specification
Input VSWR: 2.0:1
Output VSWR 2.5:1
Pulse Input: BNC Female Front Panel {TTL into 50 ohms standard} consult factory for special requirements
Pulse Width Range: Up to CW
PRF Range: Up to 100 KHz Standard, Higher PRF ranges available consult factory
Duty Cycle: Up to CW (Higher PRF ranges subject to TWT specification)
Rise & Fall Time: 25nsec nominal; 40 nsec maximum
Pulse to Pulse Jitter: +/- 5 nsec maximum
Pulse Recovery Time: 150 nsec maximum
Pulse Delay: 250 nsec maximum / 180 nsec typical
Pulse Droop: 0.5 dB/100usecs, 0.1dB/10usec
Power Output Stability: 0.2dB Pulse to Pulse at constant drive level & PRF
Pulse On/Off Ratio 80 dB
Phase Stability Pulse to Pulse: +/-1 degree nominal
Temperature: 0° to 50° C operating, -40° to 70° C non-operating
Humidity: 95% without condensation
Altitude: 10,000 feet operating, 50,000 non-operating
Cooling System Air cooled, self-contained
Modulation: All types, AM, FM, Pulse
Configuration: Rack Mount as specified in Model Table
Spurious Outputs <-60 dBc nominal
Instruments for Industry (IFI) GT825-500 Standards