IFI SMCL Series Solid State Amplifiers 100 MHz – 1000 MHz

Rent IFI SMCL Series Solid State Amplifiers 100 MHz – 1000 MHz
Enlarge Image
Request Quote Print Page
Datasheet
Instruments for Industry, SMCL-Series Amplifiers provide outstanding RF performance. These products are available in a wide range of power levels from 10 watts to 3000 watts in the 100 – 1000 MHz frequency range. These state-of-the-art solid-state power amplifiers are specifically designed for laboratory and all testing applications.

IFI RF amplifiers are very conservatively designed to operate below maximum ratings for ruggedness and long term reliability. Sixth generation LDMOS Transistors provide reliable brute-power performance at frequencies up to 1000 MHz.

Our RF power amplifiers feature heavy-duty individually shielded aluminum housings at the module level. This concept of a shielded modular design minimizes internally produced EMI signal leakage and provides easy access for field service and rapid turnaround at depot level repair facilities.

From the ground up, the “SMCL-SERIES” products are structurally engineered to withstand operation in mechanically hostile environments. Ruggedized versions are available for applications that will be exposed to very harsh environments.
 

IFI SMCL Features:

 
  • VSWR Reflected Power Protection, the unit operates without damage or oscillation into any magnitude of phase or load impedance, Open and Short Circuit Protection.
  • GPIB IEEE 488 and RS232 Remote Control
  • RF Sample Port on the Front Panel, 112R for rear panel
  • Internal Pre-amplification to obtain rated output power with an input level of 0 dBm or less.
  • Gain Control Local and Remote, 30 dB range
  • RF Input/Output Connectors on the Front Panel, 118R for rear panel
  • Internal Systems Diagnostics and Status Indicators
  • Total/Operate Elapsed Time Metering in hours
  • RF Safety Interlock
  • Forward/Reflected Power Indication simultaneously on Front Panel display
 

IFI SMCL Specifications:

 
  • Input/output Impedance: 50 ohms
  • RF Input/ Sample Connectors: Type N Female, unless specified otherwise
  • RF Output Connector: Type N Female up to 1KW amps, SC or 7/16 available, 7/16 2KW-3KW amps. Other connectors available by request or specification
  • Input VSWR: 2.0:1
  • Output VSWR: 2.5:1
  • Operating Temp: 0º to 50º C
  • Non-operating Temp: -40º to 70º C (50,000 feet max)
  • Humidity: 95% without condensation
  • Altitude: 10,000 feet
  • Cooling System: Air cooled, self contained
  • Modulation: AM, FM, Pulse
  • Configuration: Rack Mount as specified in Model Table, or Rack/Cabinet Integrated
  • Spurious Outputs: <-60 dBc nominal
  • Harmonics: -20 dBc minimum @ Linear Power
  • Standard Prime Powers:
    100, 115, 120 VAC ±10% 50/60 Hz, single phase
    220, 230, 240 VAC ±10% 50/60 Hz, single phase
    120/208 or 200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    200/220/230/240 VAC ±10% 50/60 Hz, three phase Wye or Delta power is available
    • Special Prime Powers other then listed are subject to availability
 
Models:
 
Model Number Frequency Range
(MHz)
Rated Power
(watts min.)
P1dB Power
(watts min.)
Gain
(dB min.)
kVA Weight
(lbs.)
Size (Inches)
(W x D x H)
SMCL10 100 – 1000 10 10 40 0.1 25 19 x 24 x 5.25
SMCL25 100 – 1000 25 25 44 0.2 30 19 x 24 x 5.25
SMCL50 100 – 1000 50 50 47 0.4 45 19 x 25 x 5.25
SMCL100 100 – 1000 100 80 50 0.5 60 19 x 25 x 7.0
SMCL150 100 – 1000 150 120 52 0.8 75 19 x 24 x 8.75
SMCL200 100 – 1000 200 160 53 1.4 120 19 x 24 x 8.75
SMCL250 100 – 1000 250 200 54 1.6 140 19 x 25.25 x 10.5
SMCL350 100 – 1000 350 250 56 3 160 19 x 25.25 x 10.5
SMCL500 100 – 1000 500 350 57 4 200 (2X) 19 x 25.25 x 10.5
SMCL750 100 – 1000 750 600 59 6 250 (2X) 19 x 25.25 x 10.5
SMCL1000 100 – 1000 1000 800 60 8 500 Rack Integrated
SMCL2000 100 – 1000 2000 1500 63 15 1000 Rack Integrated
SMCL2500 100 – 1000 2500 1800 64 20 1500 Rack Integrated
SMCL3000 100 – 1000 3000 2500 65 25 2000 Rack Integrated