HP Agilent 436A RF/Microwave Power Meter

Rent HP Agilent 436A RF/Microwave Power Meter
Enlarge Image
Rent HP Agilent 436A RF/Microwave Power Meter Rent HP Agilent 436A RF/Microwave Power Meter Rent HP Agilent 436A RF/Microwave Power Meter
Request Quote Print Page
Manual
General purpose digital power meter intended for manual and automatic RF and microwave power measurements

  • Compatible with the entire series of 8480 power sensors
  • Measures either absolute or relative power
  • Displays absolute power in either watts or dBm, while relative power is displayed in dB

 

Specifications:

  • Frequency Range: 100kHz to 50GHz and 75 to 110GHz (depending on power sensor used)
  • Power Range: -70dBm to +44dBm (100pW to 25W)(sensor dependent)
  • Cal Factor: 16-position switch normalizes meter reading to account for calibration factor.  Range 85% to 100& in 1% steps
  • Cal Adj: Front-panel adjustment provides capability to adjust gain in meter to match power sensor in use
  • Recorder Output: Proportional to indicated power with 1 volt corresponding to full scale and 0.316 volts to -5dB; 1 k ohms output impedance, BNC connector
  • RF Blanking: Open collector TTL; low corresponds to blanking when auto-zero mode is engaged
  • Display: Digital display with four digits.  20% over-range capability on all ranges.  Analog meter: uncalibrated peaking meter to see fast changes

 

Power Sensor Selection Guide
HP / Agilent Model Frequency Range Connector Type
25 Watt Sensors 1 mW to 25W (0 to +44dBm)
8481B 10 MHz to 18 GHz Type-N(m)
3 watt Sensors 100 µW to 3 W (-10 to +35 dBm)
8482H 100 kHz to 4.2 GHz Type-N(m)
8481H 10 MHz to 18 GHz Type-N(m)
100 mW Sensors 1µW to 100 mW (-30 to +20 dBm)
8485A 50 MHz to 26.5 GHz APC -3.5 mm (m)
8481A 10 MHz to 18 GHz Type-N(m)
8482A 100 kHz to 4.2 GHz Type-N(m)
8483A (75 ohms) 100 kHz to 2 GHz Type N(m) 75 ohms
R8486A 26.5 to 40 GHz Waveguide Flange UG-599/U
Q8486A 33 to 50 GHz Waveguide Flange UG-383/U
High Sensitivity Sensors 100 pW to 10µW (-70 to -20 dBm)
8484A 10 MHz to 18 GHz Type-N(m)
Power Range: 0.1 nW to 10 µW